Mocka Hamptons Barstool User manual

Hamptons Barstool
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
50mm
screw
x6
E
32mm screw
x8
F
allen key
x1
B
spring
washer
x6
C
screw
pin
x6
D
dowel
x6
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

12
Hamptons Barstool
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x dowels (D) into left and right legs as shown. Attach legs to
frame and secure with 2 x screws (A), 2 x spring washers (B) and 2 x
screw pins (C). Tighten with an allen key (F).
Insert 2 x dowels (D) into left and right arms as shown. Insert 2 x guides
into frame as shown. Attach base to frame and secure with 4 x screws
(A), 4 x spring washers (B) and 4 x screw pins (C). Tighten with an allen
key (F).
F
A
B
C
D
D
L
R
D
F
A
B
C

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach seat to frame as shown and secure with 8 x screws (E). Tighten
with a screwdriver.
Once assembled lift furniture into place, do not drag. Ensure unit is
balanced and steady before use. You’re done, enjoy
Hamptons Barstool
4
E