Mocka Watson Entertainment Unit User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
C
dowel
x16
D
long
screw
x18
A
bolt
x20
B
locking
nut
x20
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers and Hammer
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
small
screw
x16
F
medium
screw
x10
H
L + R
slide rail
x4
I
nut
x4
J
long bolt
x4
K
plastic
guide
x4
G
L + R
slide rail
x4 X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
Watson Entertainment Unit
1
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Insert 4 x nuts (I) into panel [9]. Attach panel [8] to panel [9] and secure
with 4 x screws (J). Tighten with a screwdriver.
Insert 4 x bolts (A) into panels [3] and [4]. Attach 1 x left slide rail (G) to
panel [3] and secure with 2 x small screw (E). Attach 1 x right slide rail
(G) to panel [4] and secure with 2 x small screw (E). Attach 1 x left slide
rail (G) to panel [6] and secure with 2 x small screw (E), flip panel over
and attach 1 x right rail (G) to panel [6] and secure with 2 x small screw
(E). Tighten with a screwdriver.
Watson Entertainment Unit
2
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
Attach panel [7] to panel [5] and secure with 4 x long screw (D). Tighten
with a screwdriver.
Slide panel [6] between the groove on panel [5] as shown.
Watson Entertainment Unit
3
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Insert 6 x dowels (C) into panel [2]. Attach panel [2] to panels [3], [4]
and [6] and secure with 6 x long screws (D). Tighten with a screwdriver.
6
6
Insert 4 x dowels (C) into panels [3] and [4]. Attach panels [3], [4] and [6]
and secure with 4 x locking nuts (B). Tighten with a screwdriver.
Watson Entertainment Unit
Assembly Instructions
4
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz |mocka.com.au
78
Attach panels [8] and [9] to panel [2] and secure with 8 x long screws (D).
Tighten with a screwdriver. Attach 4 x plastic guides (K) to panel [8] with
a hammer.
8
8
99
Slide panel [16] between the grooves on panels [3] and [4] to form the
back of the unit as shown.
5
Watson Entertainment Unit
Assembly Instructions
5
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

910
Insert 6 x bolt (A) into panel [1]. Tighten with a screwdriver. Fasten panel [1] to panels [3], [4] and [5] as shown and secure with 6 x
dowel (C) and 6 x locking nut (B). Tighten with a screwdriver.
5
B
Watson Entertainment Unit
Assembly Instructions
6
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

11 Drawer x 2 12 Drawer x 2
Insert 5 x bolts (A) into panel [10]. Attach panels [12] and [11] to
panel [10] and secure with 4 x locking nuts (B). Slide panel [13]
between the grooves on panels [12] and [11] to form the base of the
drawer as shown. Attach panel [14] to panel [10] and secure with 1 x
locking nut (B). Tighten with a screwdriver.
Attach panel [15] to panels [12], [11] and [14] and secure with 5 x
medium screws (F). Attach 2 x slide rails (H) to panels [12] and [11] and
secure with 4 x small screw (E). Tighten with a screwdriver.
Watson Entertainment Unit
Assembly Instructions
7
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

13 14
Insert each drawer into the unit as shown, ensuring they slide smoothly
and easily along the rails.
Attach 1 x wall strap (W) to panel [1] using 1 x screw (Y). Tighten with
a screwdriver.
Watson Entertainment Unit
Assembly Instructions
8
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

15
Move the unit into the desired location up against a wall, do not drag.
Use a drill to create a small hole lining up with the top of the 1 x safety
strap (W) and secure with 1 x wall anchor (X), 1 x washer (Z) and
1 x long screw. Tighten with a screwdriver. Ensure the unit is balanced
and steady before use. You’re done, enjoy!
Watson Entertainment Unit
Assembly Instructions
9
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558