Mocka Charli Bedside Table User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Charli Bedside Table
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
A B C D E F
dowel
x8
bracket
x4
bolt
x16
locking
nut x 16
small
x30
screw
x20
G
wedge
x4
H
screw
x4
screw
I J K L
CL
runner
tracks
x3
CR
runner
tracks
x3
DL
runners
x3
DR
runners
x3
M
screw
x16
felt pad
x4
O
N
handle
x3
P
long
screw
x4

12
Insert 4x bolts (A) into panel [1]. Tighten with a screwdriver.
Charli Bedside Table
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Attach 3x CL runner track (I) to panel [2] and secure with 9x small
screws (F). Attach 3x CR runner track (J) to panel [3] and secure
with 9x small screws (F). Tighten with a screwdriver.
3
2
J
F
F
F
I
CL
F
J
CR
1
A
I

Attach panels [2] and [3] to panel [1] with 4x dowels (C) and
secure with 4x locking nuts (B). Tighten with a screwdriver.
34
Slide panels [5] down along the grooves between the panels [2],
[3] and [1] to form the back of the unit as shown. Attach panel [4]
to the unit with 4x dowels (C) and secure with 4x long screws (P).
Tighten with a screwdriver.
Charli Bedside Table
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
B
3
2
1
B
C3
2
P
C
4
5
1

Attach 1x bracket (E) to each panel [6] with 2x screws (D). Attach 4x
brackets (E) to panel [4] with 16x screws (M). Tighten with a screwdriver.
5
Screw on 4x legs [6] to the brackets on panel [4] until secure.
Apply 4 x felt pads (O) to legs [6] as shown.
Charli Bedside Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
6
4
E
6
D
EO
6
6
6
M
M
E

Slide the completed drawers into the unit, ensuring they slide smoothly
and easily.
A
Jolt Wardrobe
7
Insert 4x bolt (A) into panel [7]. Tighten with a screwdriver.
Charli Bedside Table
Assembly Instructions
5
8
Attach panels [9] and [10] to panel [7] with 4x locking nuts (B).
Tighten with a screwdriver.
Drawers x3Drawers x3
B
10
B
77
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
9
Slide panel [11] along the grooves between the side panels [9] and
[10] to form the base of the drawer.
Charli Bedside Table
Assembly Instructions
6
10
Attach panels [9], [10] and [8] with 4x screws (D). Tighten with a
screwdriver.
Drawers x3Drawers x3
11
D
10
10
9
7
8
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
11
Attach DL runner (K) to panel [9] and DR runner (L) to panel [10] with
4x small screws (F). Tighten with a screwdriver.
Charli Bedside Table
Assembly Instructions
7
12
Loosen the screw on the back of the handle. Attach 1x handle (N) to
panel [7] with screw as shown. Complete the other two drawers.
Drawers x3
F
F
K
L10
9
7
N
Drawers x3
N
N
N
N
N
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
13
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Charli Bedside Table
Assembly Instructions
8
14
Attach 4x wedges (G) into the corners of the back of the unit
and secure with 4x screws (H). Tighten with a screwdriver.
G
H
G
H
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
15
Attach 1x safety strap (V) to the top of the back side of the unit
as shown using 1x washer (Z) and 1x screw (W). Tighten with
a screwdriver.
Charli Bedside Table
Assembly Instructions
9
16
Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and 1x
wall screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
X
Y
Z
X
Y
Z
V
W
Z
V
Z
W
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558