Mocka Aspen Change Table User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Aspen
Change Table
Thank you for your purchase.
Please follow the instructions below for correct assembly WARNING: Any furniture that is not anchored to a wall has
the potential to tip over in certain circumstances, i.e. if a
child attempts to climb up on the furniture or in the event
of an earthquake. Accordingly, we recommend that all
furniture is anchored to a wall. We supply a free safety
wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please
note that dierent wall materials may require dierent
fixing devices from those supplied.
D E
ABC
Hardware Supplied
Phillips screwdriver required
16x
Wall Strap
bolt
1x
20x
allen key
bolt
1x 1x
screw
F
2x
wall screw
G
1x
washer
H
1x
wall anchor wall strap
For quicker assembly, we recommend the use of a power drill on a low-speed setting.

Aspen
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
2
1
Change Table
2
Attach 4x panel [5] to panel [3] with 8x bolt (B).
Tighten all bolts with allen key (C).
Attach 2x panel [2] to panel [3] with 6x bolt (A).
Tighten all bolts with allen key (C).
B
B
B
B
BB
B
B
A
A
A
A
A
A
5
5
3
3
2
2
C
B
B
C
A

Aspen
Change Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach 1x panel [1] to panels [2] with 7x bolt (A).
Tighten all bolts with allen key (C).
Insert 2x panel [4] and attach to panel [1] with 4x bolt (B).
Tighten all bolts with allen key (C).
3 4
CA
A
A
A
A
A
A
A
1
2
2
4
4
B
B
B
B
1
C

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Aspen
Change Table
5 6
Slide 2x panel [6] into the grooves on panels [2].
Attach 1x panel [1] to panels [2] with 7x bolt (A).
Tighten all bolts with allen key (C).
1
A
A
A
A
A
A
A
6
6
2
2
2
2
C
A

Aspen
Change Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach 2x panel [4] to panel [1] with 4x bolt (B).
Tighten all bolts with allen key (C).
7 8
B
B
B
B
4
444
11
B
B
C

Aspen
Change Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Once assembled lift furniture into place, do not drag.
Attach wall strap (H) to panel [2] with 1x washer (F) and 1x screw (D).
Use a drill to create a small hole lining up with the safety strap (H).
Fasten to wall using 1x wall anchor (G), 1x washer (F) and 1x wall screw (E).
Ensure unit is balanced and steady before use. You’re done, enjoy!
9
2
D
E
F
G
H
F