Mocka Dahlia Bedside Table User manual

Dahlia Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x20
ABCDE F
G H J KI
Hardware Supplied
dowel
x12
small
screw x20
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x20
screw
x8
x4
wedge plastic
glide x4
Phillips & Flathead screwdrivers
and hammer required
L
screw
x4

Dahlia Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
E
E
E
E
E
E
E
EE
Attach 2x slide rails (F) to panel [2] and secure with 6x small screws (E).
Tighten with a screwdriver. Insert 4x bolts (C) into panel [2]. Tighten with
a screwdriver.
Attach 2x slide rails (G) to panel [3] and secure with 6x small screws (E).
Insert 4x bolts (C) into panel [3]. Tighten with a screwdriver.
.
F
FG
G
CC
CC
CC
CC
3
2
E
E
E
F
CL
E
G
CR
E

Dahlia Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panels [4], [5] and [6] to panel [2] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
Attach panel [3] to panels [4], [5] and [6] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver. Attach 4x
plastic glides (K) to the panels [2] and [3] using a hammer as shown.
2
2
4
4
4
4
5
5
6
6
3
D
A
A
D
DD
K
K
K
K
D
D
DD
A
A
D
D
K

Dahlia Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Slide panel [7] down along the grooves between the panels [2]
and [3] to form the back of the unit as shown.
Insert 4x bolts (C) to panel [1]. Tighten with a screwdriver.
2
3
7
1
C
C
C
C

2
3
1
8
Dahlia Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78 Drawer x2
Attach panel [1] to the unit with 4x dowels (A) and secure with 4x
locking nuts (D). Tighten with a screwdriver.
Insert 4x bolts (C) into panel [8]. Tighten with a screwdriver.
D
D
D
A
A
A
C
C
C
C

Dahlia Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 Drawer x2 10 Drawer x2
Attach panels [11] and [12] to panel [8] secure with 4x locking nuts (D).
Tighten with a screwdriver.
Slide panel [9] along the grooves between the panels [11] and [12] .
8
11
11
12
12
9
DD
DD

Dahlia Bedside Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 Drawer x2
Assembly Instructions
Attach panels [10], [11] and [12] as shown using 4x screws (B).
Tighten with a screwdriver.
Attach slide rail (I) and slide rail (H) to the underside of the side panels
as shown. Secure with 4x small screws (E) and tighten with a screwdriver.
12 Drawer x2
E
E
E
I
H
E
BB
BB
11
11
10
12
12

Dahlia Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1413
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (L). Tighten with a screwdriver. Attach 1x safety
straps (V) to the top of the back side of the unit as shown using
1x washers (Z) and 1x screws (W). Tighten with a screwdriver.
L
L
J
J
V
V
Z
W
Z
W

Dahlia Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use.
You're done, enjoy!
X
Y
Z
wall
anchor
screw
strap
washer