Mocka Watson Four Drawer User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
C
dowel
x14
D
long
screw x16
A
bolt
x36
B
locking
nut x36
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
X
Z
Y
W
safety
strap x1
screw
x1
long
screw x1
wall
anchor
x1
washer
x1
Phillips & Flathead screwdrivers and Hammer
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
small
screw x32
G
L + R slide
rail x8
F
medium
screw x24
H
L + R slide
rail x8
I
nut
x4
J
long bolt
x4
K
plastic
guide
x4
Watson Four Drawer
1
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach 4 x L slide rails (G) to panel [3] and secure with 8 x small screw
(E). Attach 4 x R slide rails (G) to panel [4] and secure with 8 x small
screw (E). Insert 6 x bolt (A) into panels [3] and [4]. Tighten with a
screwdriver.
Insert 6 x dowel (C) into panels [3] and [4]. Attach panels [3], [4] and [6]
and secure with 6 x locking nuts (B). Tighten with a screwdriver.
Watson Four Drawer
2
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
Insert 4 x dowel (C) into panel [2]. Attach panels [2] to panel [3], [4] and
[5] and secure with 6 x long screw (D). Attach 1 x safety strap (W) to
panel [5] and secure with 1 x screw (Y).
Insert 4 x nut (I) into panels [9]. Attach panels [8] and [9] and secure with
4 x long screw (J). Tighten with a screwdriver.
Watson Four Drawer
3
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Insert 6 x bolt (A) into panel [1]. Attach panel [7] to panel [1] and secure
with 4 x long screw (D). Tighten with a screwdriver.
Attach panels [8] and [9] to panel [2] and secure with 6 x long screw (D).
Tighten with a screwdriver. Insert 4 x plastic guide (K) into panel [8] with
a hammer.
Watson Four Drawer
Assembly Instructions
4
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz |mocka.com.au
78Drawer x 4
Slide panel [16] between the grooves on panels [3], [4] and [5] to form
the back of the unit as shown.
Insert 6 x bolts (A) into panel [10]. Attach panels [12] and [11] to
panel [10] and secure with 4 x locking nuts (B). Slide panel [13] between
the grooves on panels [12] and [11] to form the base of the drawer as
shown. Attach panel [14] to panel [10] and secure with 2 x locking nuts
(B). Tighten with a screwdriver.
Watson Four Drawer
Assembly Instructions
5
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

A
B
9Drawer x 4 10
Attach panel [15] to panels [12], [11] and [14] and secure with 6 x
medium screws (F). Attach 2 x slide rails (H) to panels [12] and [11] and
secure with 4 x small screw (E). Tighten with a screwdriver.
Fasten panel [1] to panels [3], [4] and [5] as shown and secure with 4 x
dowel (C) and 6 x locking nut (B). Tighten with a screwdriver.
A
A
A
A
Watson Four Drawer
Assembly Instructions
6
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

11
12
Insert each drawer into the unit as shown, ensuring they slide smoothly
and easily along the rails. Once assembled, lift furniture into place, do
not drag.
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the safety strap (W). Fasten
to the wall using 1 x wall anchor (X), 1 x washer (Z) and 1 x long screw.
Ensure the unit is balanced and steady before use. You’re done, enjoy!
Watson Four Drawer
Assembly Instructions
7
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558