Mocka Kennedy Three Drawer User manual

Kennedy Three Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x39
bracket
x4 long
bolt x4
wedge
x4
allen
key x1
screw
x4 x16
washer
bolt
x16
screw
x8
screw
x18
plug
x3
cover
x3
long
screw
x3
A B C D E F G HJK
LM N
I
O
Hardware Supplied
PQR
dowel
x8
screw
x45
slide
rail x3
slide
rail x3
slide
rail x3
slide
rail x3
bracket
x3
S T U
locking
nut x39

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
2
12
C
C
C
C
C
C
C
C
C
C
C
C
1
5
M
M
M
4
6
EE
EE
J
J
x2
Insert 6x bolts (C) into panel [1]. Attach panel [5] to panel [1] using
3x screws (M). Tighten with a screwdriver.
Attach 1x bracket (J) to panel [6] and secure with 2x screws (E). Tighten
with a screwdriver and attach 1x cover (K) as shown. Insert 6x bolts (C)
into panel [1]. Attach 1x bracket (J) to panel [4] and secure with 2x screws
(E).Tighten with a screwdriver and attach 1x cover (K) as shown.
EE
K
JJ
The round head
is aligned with the
direction of the arrow

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
3
34
C
C
C
C
CC
CC
2
3
C
C
C
C
3
2
6
6
D
D
DD
D
D
D
D
D
D
8
DD
Insert 6x bolts (C) into panel [2]. Insert 6x bolts (C) into panel [3].
Tighten with a screwdriver.
Attach panels [6] and panel [8] to panels [2] and [3] using 12x locking
nuts (D). Tighten with a screwdriver.

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
4
56
2
3
7
8
2
3
4
A
A
A
D
D
D
D
D
Slide panel [7] down along the grooves between the side panels to form
the back of the unit.
Attach panel [4] to panels [2] and [3] using 4x dowels (A) and secure with
6x locking nuts (D). Tighten with a screwdriver.

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
5
78
4
9
9
9
9
9
x4
P
Q
S
S
S
S
S
S
U
U
T
T
T
T
T
T
R
R
front
back
2
3
E
E
E
E
E
E
E
E
E
E
E
E
F
F
F
G
G
G
G
CR
front
Attach a leg bracket (P) to each leg [9] using 2x screws (R) and 1x long
bolt (Q). Tighten with the allen key (U) and screwdriver. Attach the leg
panels [9] to panel [4] using 16x bolts (S) and 16x washers (T) as shown.
Tighten with the allen key (U).
Attach 3x slide rails (G) to panel [3] and secure with 9x screws (E).
Attach 3x slide rails (F) to panel [2] and secure with 9x screws (E).
Tighten with a screwdriver.

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
6
910
2
3
7
8
1
2
3
A
D
D
A
A
D
D
D
Slide panel [7] down along the grooves between the side panels to form
the back of the unit.
Attach panel [1] using 4x dowels (A) and secure with 6x locking nuts (D).
Tighten with a screwdriver.

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
7
11 12
10
C
C
C
C
C
E
L
11
12
13
14
17
DD
D
D
D
10
11
12
Insert 15x bolts (C) into panels [10], [11] and [12]. Attach 3x plug (L) to
panels [10], [11] and [12] and secure with 3x screw (E). Tighten with a
screwdriver.
Attach panel [13] ,[14] and [17] to front panel [10], [11] and [12] using 15x
locking nuts (D).Tighten with a screwdriver.

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
8
13 14
13
14
15
10
11
12
13
14
16
B
B
B
B
BB
10
11
12
Slide panel [15] along the grooves between the side panels [13] and [14]
to form the base of the drawer.
Attach panels [13], [14] and [16] as shown using 6x screws (B).
Tighten with a screwdriver.

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
9
15 16
DR
DL
H
I
E E
E
E
E
E
10
11
12
13
14
E
E
I
E
E
10 11 12
E
H
E
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails.
Attach slide rails (I) and slide rails (H) to the underside of the side panels as
shown. Secure with 6x screws (E) and tighten with a screwdriver.

Kennedy Three Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au
10
17 18
V
V
Z
Z
W
W
O
O
N
N
O
O
N
N
X
Y
Z
Attach 4x wedges (N) into the corners of the back of the unit and secure
with 4x screws (O). Tighten with a screwdriver.Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is
balanced and steady before use. You’re done, enjoy!