Mocka Watson 8 User manual

A B C D
EFHG
Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
dowel
x36
bolt
x20
locking
nut x20
shelf
plug x1
long
screw x1
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Watson 8 Cube Storage Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
x24
long screw
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
1
X
Z
Y
W
safety
strap
x2
screw
x2
long
screw
x 2
wall
anchor
x2
washer
x2
mocka.co.nz | mocka.com.au
40
nut
x4
long
screw x4
x4
long screw
I
40

2
12
Watson 8 Cube Storage Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
A
A
A
A
AA
A
A
A
I
I
I
I
A
1
7
Insert 10 x bolts (A) into panel [1]. Attach panel [7] into panel [1] and
secure with 4 x long screws (I). Tighten with a screwdriver.
3
3
3
4
D
D
D
D
D
D
Attach panel [3] into panel [4] and secure with 6 x long screws (D) 6 x
Tighten with a screwdriver.
dowel (C).
C
C
C
C

3
34
Watson 8 Cube Storage Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Attach panel [3] into panel [4] and secure 6 x bolts (A) and 6 x dowel (C).
A
3
3
3
4
A
A
A
A
C
C
C
C
5
A
A
C
B
A
x2
C
B
x2
Screw in 2x bolts (A) and insert 2x dowels (C) into holes in panel [5].
Slot together with the rest of the structure as shown. Place 2x locking
nuts (B) into holes in the panels and tighten with screwdriver.
B
B
x6
B
x6
A
C
Slot together with the rest of the structure as shown. Place 6x locking
nuts (B) into holes in the panels and tighten with screwdriver.

4
56
Watson 8 Cube Storage Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
A
x2
C
B
x2
Screw in 2x bolts (A) and insert 2x dowels (C) into holes in panel [6].
Slot together with the rest of the structure as shown. Place 2x locking
nuts (B) into holes in the panels and tighten with screwdriver.
C
6
B
B
8
Slide panel [8] between the grooves on panels [5] and [6] to form the
back of the unit as shown.
6
5
5

5
78
Watson 8 Cube Storage Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
D
D
D
D
D
D
D
D
D
D
2
G
G
G
G
H
HH
9
9
10
10
Insert 4 x nuts (H) into panel [10]. Attach panel [9] to panel [10] and secure
with 4 x screws (G). Tighten with a screwdriver.
C
C
Insert10 xdowels (C) into panel [2]. Attach panel [2] to panels [5], [6]
and [2] and secure with 10 x long screws (D). Tighten with a screwdriver.
6

6
910
Watson 8 Cube Storage Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Attach panel 10 to panel 2 with 8 long screws (D). Attach centre support leg
(E) to panel 2. Attach screw (F) to centre support (E) as shown.
D
D
D
D
D
D
D
D
2
10
8
Flip unit over as shown slide panel [8] between the grooves on panels [5]
and [6] to form the back of the unit as shown.
6
5
E
F

7
11 12
Watson 8 Cube Storage Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
B
1
BB
BB
BB
B
B
6
5
3
3
3
Fasten panel [1] to panels [5], [6] and [3] as shown and secure with 10 x
dowel (C) and 10 x locking nut (B). Tighten with a screwdriver.
C
C
C
C
C
W
Y
W
Y
Attach 2 x wall strap (W) to panel [7] using 2 x screw (Y). Tighten with
a screwdriver.
7

8
13
Watson 8 Cube Storage Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
W
X
Z
W
X
Z
Move the unit into the desired location up against a wall, do not drag.
Use a drill to create a small hole lining up with the top of the 2 x safety
strap (W) and secure with 2 x wall anchor (X), 2 x washer (Z) and
2 x long screw. Tighten with a screwdriver. Ensure the unit is balanced
and steady before use. You’re done, enjoy!