Mocka Sadie Coffee Table User manual

Sadie Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x61
ABC D E F
GHJ K
I
Hardware Supplied
dowel
x28
screw
x32
slide
rail x4
slide
rail x4
slide
rail x4 slide
rail x4
locking
nut x61
screw
x15
x16
screw plastic
glide x10
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required

Sadie Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1x2 2
Insert 4x bolts (C) into panels [3]. Attach 2x slide rails (F)
and 2x slide rails (G) to panels [3] with 8x screws (E).
Tighten with a screwdriver.
Attach 2x slide rails (F) and 2x slide rails (G) to panel [4]
with 8x screws (E). Tighten with a screwdriver.
F
G
FLIP
CR G
E
FCL
E
E
E
E
E
F
G
CR G
E
FCL
E
E
E
E
E
F
G
E
E
E
E
C
C
3
4
4

Sadie Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4x2
Insert 3x bolts (C) into panel [5]. Tighten with
a screwdriver.
Insert 4x bolts (C) into panels [6]. Tighten with a screwdriver.
C
C
C
C
C
5
6

Sadie Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [5] to panels [6] with 6x screws (B) and 4x dowels (A).
Tighten with a screwdriver.
Attach panel [4] to panel [5] with 3x locking nuts (D) and 2x dowels (A).
Tighten with a screwdriver.
B
B
B
A
BD
D
D
B
B
A
A
6
6
5
5
4
A
A
D

Sadie Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panels [3] to panels [7] with 4x locking nuts (D) and 4x dowels (A).
Tighten with a screwdriver.
Attach panels [7] to panels [6] with 4x locking nuts (D)
and 4x dowels (A). Tighten with a screwdriver.
DA
A
D
A
A
A
A
A
D
D
D
D
D
D
A
6
6
7
7
7
7
7
7
7
7
3
3

Sadie Coffee Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Insert 20x bolts (C) and 8x dowels (A) into panel [5]. Tighten with
a screwdriver.
Attach panels [8] to panel [1] and secure with 8x locking nuts (D).
Tighten with a screwdriver.
C
C
C
C
C
A
A
A
A
A
A
CC
D
D
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
A
A
D
D
D
D
11
8
8
8
8

Sadie Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach panels [3] and [6] to panel [1], secure with 12x locking nuts (D).
Tighten with a screwdriver.
Insert 10x bolts (C) into panel [2]. Tighten with a screwdriver.
C
3
3
1
2
6
6
D
D

Sadie Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Attach panel [2] to panels [3] and [4], secure with 9x screws (B)
and 6x dowels (A). Tighten with a screwdriver.
Insert 4x bolts (C) into panels [9]. Attach panels [9] and [10] together with
4x locking nuts (D). Tighten with a screwdriver. Attach 10x plastic glide (K)
to panels [9] and [10] with a hammer.
B
BB
B
B
B
B
B
B
C
A
A
A
A
X2
C
D
D
D
K
K
K
K
K
K
K
K
K
K
3
3
9
9
9
10
10
2
4

Sadie Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16 Drawers x4
Attach panels [9] and [10] to panel [2] with 10x locking nuts (D).
Tighten with a screwdriver.
Insert 16x bolts (C) into panels [11] and [12]. Tighten with a screwdriver.
CC
CC
CC
CC
x2
3
12
D
D
D
D
D
D
D
2
3
10
3
10
3
9
3
9
x2
3
11

Sadie Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 Drawers x4 18 Drawers x4
Attach panels [13] and [14] to panels [11] and [12], secure
with 16x locking nuts (D). Tighten with a screwdriver.
Slide panels [15] down along the grooves between the panels [13]
and [14] as shown.
D
x2
x2
D
D
D
DD
DD
3
11
3
12
x2
3
12
3
13
3
14
3
13
3
15
3
15
3
14
3
13
3
14
3
13
3
14
x2
3
11