Mocka Hudson Kids Chairs User manual

Once fully assembled please ensure all legs are
sitting flush against the chair underside to ensure
stability. Do not over-tighten screws.
The recommended age for this set is 2-6 years.
To ensure longevity of the wood please use a damp
cloth only for cleaning. Avoid use of household cleaners.
AB
x1
Allen key
x 24
screw
Hardware Supplied
Hudson Kids Chairs
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Find two round seat pieces and four leg braces. Attach two leg braces
to a round seat piece using 2x screws (A) in each. Tighten screws with
allen key (B).
AA
A A
A
x2
A
B
A
x2
A
Hudson Kids Chairs
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Find two long chair leg pieces and attach to the leg braces using
2x screws (A) in each. Fasten screws using allen key (B)
ensuring pieces sit flush against each other, but do not tighten.
Ensure the screws on the leg braces are loose. This will help to
fit the backrests onto the chair.
B

34
Take two front chair legs and attach in place using 2x screws (A) in
each leg. Tighten screws with allen key (B).
AA
A
B
x2
A
x2
Hudson Kids Chairs
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Push the backrest piece onto the tops of the chair legs as shown. The
backrests will fit into place even if they appear too wide. Gently pull the
top of the back legs together (as they do flex) and then attach the
backrest. Ensures the overall integrity of the chair is secure and stable
and then tighten all of the (A) screws on the chair to pull it all together.
Repeat Steps 1 to 4 again to assemble the second chair.