Mocka Hamptons Side Table User manual

Hardware Supplied
Hamptons Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
B
ACDE
bolt
x 4
locking
nut x 4
dowel
x 8
small
screw x 2
40 mm
long
screw x 4
25 mm

2
12
Hamptons Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
4
1
A
Insert 4 x bolt (A) into panels [1] .Attach 2 x screw (E) into panel [4] and[1].
Tighten with a screwdriver.
E
A
A
AECC
CC
DD
D
D
2
3
3
Insert 4 x dowel (C) into panel [3] and [2] .
Attach panels [3] to panel [2] and secure with 4 x long screws(D).

3
34
Hamptons Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
C
3
3
1
C
CC
BBB
B
Tighten with a screwdriver.
Insert 4 x dowel (C) into panel [3]. Attach panels [1] to panel [3], [1] and
[3] and secure with 4 x locking nuts (B).