Mocka Denham Desk User manual

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
bolt
x10
A B C D EFG H J
KL Q
I
Hardware Supplied
dowel
x10
screw
x14
slide
rail x1
slide
rail x1
slide
rail x1
slide
rail x1
locking
nut x10
screw
x4
handle
x2
R
M O P N
screw
x4
bolt
x8
plastic
glide
x4
S T
bracket
x4
bolt
x24
wedge
x4
screw
x4
hinge
x2
screw
x12
Allen
Key
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel layout 1
C
Insert 4x bolts (C) into panel [1] and Tighten with a screwdriver.
1
1
27
3
6
4
5
34
30
31
32
41
40
33
C
C
C
C
x4
x2

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2 3
Attach panels [3] and [4] to panel [6] with 2x dowels (A) and secure with 2x
locking nuts (D). Tighten with a screwdriver.
Attach 1x slide rails (Q) to panel [3] and 1x slide rails (R) to panel [4]
Insert 2x bolts (C) into panel [3] and panel [4] secure with 6x small
screws (E). Tighten with a screwdriver.
Q
CL
E
R
CR
E
4
6
3
4
3
E
E
E
E
E
E
C
C
R
Q
A
A
D
D
D

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
Slide panel [5] down along the grooves between the panels [3] and [4] to form
the back of the unit as shown.
Attach panel [3] and [4] to panels [1] with 4x dowels (A) and secure with
4x locking nuts (D). Tighten with a screwdriver.
3
3
5
4
4
1
A
A
AD
D

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Attach 4x brackets (J) to legs [40] using 8x bolts (I). Tighten with a screwdriver.
Attach legs [40] to panel [2] using 16x bolt (L) and legs [41] to panel [1] using
8x bolt (L) as shown. Tighten with an Allen key (F). Attach 4x plastic glide (K)
to the ends of the legs.
Attach panel [2] to panels [3] and [4] with 4x dowels (A) and secure
with 4x screws (B). Tighten with a screwdriver.
3
1
2
41
41
40
40
40
4
2
B
B
B
B
A
A
A
B
L
L
L
K
K
K
J
J
J
J
J
J
F
K
K
L
L
L
L
L
L
L
L
L
L
L
L
L
I
F
front
back
J
J

Denham Desk
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
8 9
Assembly Instructions
Attach panels [30] and [31] to panel [32] as shown using 4x screws (H).
Tighten with a screwdriver.
C
C
C
C
H
H
H
H
34
30
31
32
Insert 4x bolts (C) into panel [34]. Tighten with a screwdriver.

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1110
Slide panel [33] down along the grooves between the panels [30]
and [31] to form the back of the unit as shown.
Attach panel [34] to panels [30] and [31] secure with 4x locking nuts (D).
Tighten with a screwdriver.
D
D
D
D
31
30
33
30
31
34

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1312
Attach slide rail (S) and slide rail (T) to the underside of the side
panels as shown. Secure with 4x screws (E) and tighten with a
screwdriver.
Attach 1x handle (G) to panel [34] secure with 2x screws (E).Tighten with
a screwdriver.
E
E
E
E
T
S
E
G
E
34
31
30

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1514
pp
O
O
O
PP
P
P
P
P
P
GE
E
P
7
7
3
Attach 2x hinges (O) to panel [7] secure with 4x screws (P).Tighten
with a screwdriver.
Attach hinges on panel [7] to the unit using 8x screws (P). Tighten with
a screwdriver. Ensure the doors open and close easily. Attach 1x handle
(G) to panel [7] secure with 2x screws (E).Tighten with a screwdriver
NOTE: If the doors are uneven or there is a gap
in the middle, loosen or tighten the screw on the
door hinge until they are sitting flush.

Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
1716
Attach 4x wedges (M) into the corners of the back of the unit and
secure with 4x screws (N). Tighten with a screwdriver. Attach 1x
safety straps (V) to the top of the back side of the unit as shown
using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
N
M
N
M
W
T
X
W
Z
V
N
M

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
1918
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before use.
Z
X
Y
wall
anchor
strap
washer
You’re done, enjoy!

Denham Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
12
HOW TO ADJUST THE HINGES TO
ALIGN THE DOORS IF NEEDED.
Open the door.
1. 2. 3.
1. 2. 3.
1. 2. 3.
STEP 1
Adjuse the door panelsupward or downward
STEP 2
Adjuse the flush between door panel and side panel
STEP 3
Adjuse the Gap beteen door
panel and side panel
STEP 4
Loosen this screw a bit. MOVE DOOR BACK OR
FORTH Re-tighten this screw.
Panel
Door
Unscrew 2 screws in round
holes loosen 2 screws in oval
holes a bit.
Tighten 2 screws in oval
holes. Screw in 2 screws in
round holes
MOVE DOOR UPWARD
OR DOWNWARD
MOVE DOOR OUTWARD
by turning this screw
counter-clockwise
KEEP DOOR IN RIGHT
POSITION MOVE DOOR OUTWARD
by turning this screw clockwise