Mocka Orlando User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Orlando
Change Table
Thank you for your purchase.
Please follow the instructions below for correct assembly
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend these are used to prevent your product tipping.
The fixing device provided should fit most wall types, but please note that dierent wall materials
may require dierent fixing devices from those supplied.
Phillips screwdrivers required.
D
1x
A
12x
bolt
E
1x
B
Bx
F G
bolt
Hardware Supplied
2x 1x
C
1x
H
allen key
1x
screwwall screwwasher wall anchor wall strap
Wall Strap
For quicker assembly, we recommend
the use of a power drill on a low-speed setting.

1
Orlando
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
2
Change Table
2
Attach 3x panel (3) to panel (1) with 3x bolts (A). Tighten all bolts
with allen key (C).
Attach panel (2) to panel (1) with 2x bolts (B). Tighten all bolts
with allen key (C).

Orlando
Change Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach panel [2] to panel [1] with 2x bolts (B). Attach 3x panels [3] to
panel [1] with 3x bolts (A). Tighten all bolts with allen key (C).
3
Attach 2x panels [2] to panel [1] with 4x bolts (B). Attach 3x panels [3]
to panel [1] with 6x bolts (A). Tighten all bolts with allen key (C).
4

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Orlando
Change Table
5
Once assembled lift furniture into place,do not drag.
Attach wall strap (H) to panel [2] with 1x washer (F) and 1x screw (D).
Use a drill to create a small hole lining up with the safety strap (H).
Fasten to wall using 1x wall anchor (G), 1x washer (F) and 1x wall screw (E).
Ensure unit is balanced and steady before use. You're done.enjoy!