Mocka Dakota Trestle User manual

A B C D
Hardware Supplied
30mm
bolt x6
50mm
bolt x2
40mm
bolt x12
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note that
different wall materials may require different fixing devices from
those supplied.
adjusters x2
height
x2
washer
Z
Wall
Screw x1
r/washer
screw
x1
Y
wall
anchor
x1
X
Safety
Strap x1
W
Wall Strap
V
E
x1
allen key
Dakota Trestle
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Assemble the trestle legs by attaching panel [1] to panel [2] using 2x
40mm bolts (A). Tighten with the allen key (E). Repeat this step using
the other panels [1] and [2].
Attach the leg panels [1]/[2] to panels [3] using 8x 40mm bolts (A).
Tighten with the allen key (E).
A
2
1
E
Ax2
32
1
3
2
1
A
E
A
A
A
A
A
A
A
Dakota Trestle
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Assemble the trestle legs by attaching panel [1] to panel [2] using 2x
40mm bolts (A). Tighten with the allen key (E). Repeat this step using
the other panels [1] and [2].
Attach the leg panels [1]/[2] to panels [3] using 8x 40mm bolts (A).
Tighten with the allen key (E).
A
2
1
E
Ax2
32
1
3
2
1
A
E
A
A
A
A
A
A
A
34
Turn the frame over and attach to the underside of panel [4]. Use 2x
50mm (C) bolts to secure panels [3], and 6x 30mm bolts (B) to secure
panels [1] and [2]. Tighten all bolts with the allen key (E). If the floor is
uneven, attached 2x height adjusters (D) to the inner legs as shown.
Carefully turn over the trestle table onto its base. Insert the baskets [5]
down between the legs.
5
4
3
B
B
B
C
C
B
B
B
3
E
5
D
D
Dakota Trestle
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Wall Strap
Attach safety strap (V) to the underside of the table using 1x washer (Z)
and 1x screw (Y). Tighten with a screwdriver. Once assembled lift
furniture into place, do not drag.
Use a drill to create a small hole lining up with the top of the safety strap
(V). Fasten to wall using 1x wall anchor (X), 1x washer (Z) and 1x screw
(W). Ensure unit is balanced and steady before use. You’re done, enjoy!
V
X
Z
W
x1
wall
anchor
wall
screw
Washer
Strap
Y
V
Z
Z
V
Y
Dakota Trestle
Assembly Instructions
4
mocka.co.nz | mocka.com.au