Mocka Charli User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Charli Buffet
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
A B C D E F
dowel
x16
bolt
x20
locking
nut x 20
small
x54
long
screw
x12
G
wedge
x12
H
screw
x12
screw
bolt
x8
I
hinge
x4
J K
LM
CL
runner
tracks
x3
CR
runner
tracks
x3
DL
runners
x3
DR
runners
x3
NO
handle
x5
P
shelf
plug x8
adjuster
x1
Q
felt pad
x4
R
long
screw
x8
T
washer
x8
S
spring
washer
x8
U
allen
key
x1

12
Insert 8x bolts (A) into panels [1]. Attach 3x CL runner track (J) to
panel [5] and secure with 9x small screws (F). Attach 3x CR
runner track (K) to panel [6] and secure with 9x small screws (F).
Tighten with a screwdriver.
Charli Buffet
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Attach 4x hinges (I) to door panels [11] and [12], securing with 8x
small screws (F). Tighten with a screwdriver.
1
A
6
5
12
11
I
F
I
F
I
F
I
F
F
I
F
J
CR
F
K
CL
J
F
F
K

Attach panels [5] and [6] to panel [1] with 4x dowels (C) and secure with
4x locking nuts (B) and tighten with a screwdriver.
34
Attach panels [2] and [3] to panel [1] with 4x dowels (C) and secure with
4x locking nuts (B) and tighten with a screwdriver.
Charli Buffet
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
3
2
B
B
1
C
C
C
C
B
1
5
6
C
C
C
C
B
B
B
B

Slide panels [7] and [8] between the grooves of panels [1] ,[2] ,[3] ,[5] and
[6] to form the back of the unit, as shown.
56
Attach panel [4] to the rest of the unit with 8x dowels (C) and
secure with 8x long screws (R) and tighten with a screwdriver.
Charli Buffet
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
2
7
3
8
7
5
6
C
R
4
1

Jolt Wardrobe
7
Attach 4x legs [9] to panel [4] with 8x washers (T), 8x spring washers
(S) and 8x bolts (E). Tighten with an Allen key (U). Turn 1x support
leg [10] into panel [4] until firm. Insert the adjuster (P) into the
middle support leg. Apply 4 x felt pads (Q) to legs [9] as shown.
Charli Buffet
Assembly Instructions
5
8
Secure door panels [11] and [12] to the main unit by attaching the
other end of the 4x hinges (I) with 16x small screws (F) as shown.
Loosen the screw on the back of the handle. Attach 2x handles (N)
to panels [11] and [12] with screw as shown.
11
3
2
12
F
F
I
I
I
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
T
T
E
9
N
N
N
N
N
N
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
10
P
P
4
N
Q
9
9
9
E
U
S
S

Jolt Wardrobe
9
Insert 8x shelf plugs (O) into the end cavities of the cabinet as shown.
Insert 2x panels [13] and balance on top of the plugs.
Charli Buffet
Assembly Instructions
6
10
Insert 4x bolt (A) into panel [14]/[19]. Tighten with a screwdriver.
3
2
5
6
13
13
O
A
14
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
x 2
19

Jolt Wardrobe
11
Attach panels [16] and [17] to panel [14]/[19] with 4x locking nuts (B).
Tighten with a screwdriver.
Charli Buffet
Assembly Instructions
7
12
Slide panel [18] along the grooves between the side panels [16] and
[17] to form the base of the drawer.
B
17
B
16
17
16
18
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
14 x 2
19 14 x 2
19

Jolt Wardrobe
13
Attach panels [16], [17] and [15] with 4x long screws (D). Tighten with
a screwdriver.
Charli Buffet
Assembly Instructions
8
14
Attach DL runner (L) to panel [16] and DR runner (M) to panel [17]
with 4x small screws (F). Tighten with a screwdriver.
D
17
15
16
F
F
L
M
16
17
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
14 x 2
19
14 x 2
19

Jolt Wardrobe
15
Loosen the screw on the back of the handle. Attach 1x handle (N) to
panel [14]/[19] with screw as shown. Complete the other two drawers.
Charli Buffet
Assembly Instructions
9
16
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
N
N
N
N
N
N
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
14 x 2
19
19
14
14

Jolt Wardrobe
17
Attach 12x wedges (G) to the corners of the backs [7] and [8] as
shown, and secure with 12x screws (H). Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer
(Z) and 1x screw (W). Tighten with a screwdriver.
Charli Buffet
Assembly Instructions
10
18
Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and 1x
wall screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
X
Y
Z
X
Y
Z
V
W
Z
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
V
Z
W
H
G
H
G
7
8
7