Mocka Jesse Bedside Table User manual

*We recommend using a Flathead screwdriver to tighten all locking nuts 100%
inserting the nut to ensure it locks 100%
WARNING: Any furniture that is not anchored to a
wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on
the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but
please note that different wall materials may require
different fixing devices from those supplied.
Jesse Bedside Table
1
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
J
K
bracket
x4
bracket
screw x8
B
A
x20
CD E
FG
x20
x8 x2
L + R
bolt
locking nut
dowel
HI
35 mm
x8
small screw
x4 x4
screw
x4
Hardware Supplied
x2
L + R
cam nut cam bolt long
screw x4
x2
washer
Z
wall
screw
Y
wall
anchor
x1
X
safety
strap x1
W
V
screw
x1
x1
Wall Strap
plastic
glide x4
L

12
To begin assembly, screw 4x bolts (A) and insert 4x wooden dowels
(B) into panel [1].
Next attach 2x rail components (D) to the inside of panels [3] & [4] using
2x screws (C) in each and the holes provided.
AB
BA
AB
BA
A
x4
1
4
C
C
D
3
C
C
D
x4
C
Jesse Bedside Table
2
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Assembly Instructions
12
To begin assembly, screw 4x bolts (A) and insert 4x wooden dowels
(B) into panel [1].
Next attach 2x rail components (D) to the inside of panels [3] & [4] using
2x screws (C) in each and the holes provided.
AB
BA
AB
BA
A
x4
1
4
C
C
D
3
C
C
D
x4
C

34
Slot panels [3] and [4] together with panel [1]. Place 4x locking nuts (E)
into holes in the vertical panels and tighten with a flathead screwdriver.
Slide the back panel [5] down into place in the grooves of panel [3] and
[4].
Insert 4x dowels (B) into the top of panel [3] and [4]. Attach the base
panel [2] by inserting 4x long screws (H) and tighten with a screwdriver.
Screw 8x bolts (A) into holes in the base panel [2].
E
x4
4
E
3
E
E
1
5
B
A
x8
H
x4
H
A
A
A A A
A
A
H
H
H
B
B
B
2
4
3
A
Jesse Bedside Table
3
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Assembly Instructions

56
Attach the base and legs using 8x locking nuts (E). Tighten with a
screwdriver.
E
x4
A
A
x4
6 7
9
9
E
8
6
7
8
7
6
E
G
G
G
F
G
EFF
EF
E
EE
E
Jesse Bedside Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
7
G
F
To assemble the base insert 4x bolts (A) and 4x cam bolts (G)
into the legs [6] & [7]. Connect all components together using
4x locking nuts (E) and 4x cam nuts (F). Tighten with a screwdriver.

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
78
Jesse Bedside Table
Assembly Instructions
5
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
JK
K
JK
K
Attach 4x brackets (J) to legs and panel [2] with 8x bracket screws (K).
Tighten with a screwdriver. Attach 4x plastic glides (L) into the panels with
a hammer as shown.
7
2
6
6
L
To assemble the drawer screw 4x bolt (A) into holes in the front panel
[10]. Attach side panels [11] and [12] to the front panel by inserting 4x
locking nuts (E) into holes in the side panels and tighten with a flathead
screwdriver.
A
x4
E
x4
11
12
10
E
E
AA
E
AA
7
L
L
L
L

910
Jesse Bedside Table
Assembly Instructions
6
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
910 Drawer
Attach the back panel [14] into place between the side panels [11] and
[12] using 4x screws (I) in the holes provided with a screwdriver.
I
I
I
14
12
11
I
13
10
Slide the base panel [13] into place in the grooves in side and front
panels as shown.

11
12
Flip the bedside cabinet over onto its legs. To complete the assembly
slide the completed drawer into place on the rails in the beside cabinet
as shown.
Jesse Bedside Table
Assembly Instructions
7
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Attach 2x rail components (D) to both left and right side of each drawer
using 4x screws (C).
DL
C
C
C
DR

13 14
Attach 1x safety strap (V) to the top of the back side of the unit using 1x
washer (Z) abd 1x screw (W). Tighten with a screwdriver. Once
assembled lift furniture into place, do not drag.
Wall Mount
V
W
Z
Z
V
W
Jesse Bedside Table
Assembly Instructions
8
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Ensure that the drawer easily slides open and closed.

15 16
You’re done, enjoy!
Jesse Bedside Table
Assembly Instructions
9
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the safety strap (V). Fasten
to wall using 1x wall plug (X) and 1x long screw (Y). Ensure unit is
balanced and steady before use.
X
Y
Z
wall
plug
screw
strap
washer