Mocka Kirra Buffet User manual

Kirra Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x8
x8
wedge
x4
long
screw
x8
A B C D E F G HJ
KLM N
I
O
Hardware Supplied
P
dowel
x16
screw
x56
slide
rail x3
slide
rail x3
slide
rail x3
slide
rail x3
locking
nut x8
screw
x12
x4 x4
wheel wheel
screw
x24
screw
x4
shelf
Q R
bolt
x12
locking
nut x12
plugs small small

Kirra Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au
2
12
3
5
F
CL
E
G
CR
E
E
E
E
E
E
E
E
E
E
E
E
E
F
F
F
G
G
G
CA
CA
CA
C
A
AC
AC
AC
AC
1
Attach 3x slide rails (G) to panel [3] and secure with 6x small screws (E).
Attach 3x slide rails (F) to panel [5] and secure with 6x small screws (E).
Tighten with a screwdriver.
Insert 8x dowels (A) to panel [1]. Insert 8x bolts (C) into panel [1].
Tighten with a screwdriver.

Kirra Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au
3
3 4
Attach panels [2] , [3] , [4] and [5] to panel [1] and secure with
8x locking nuts (D). Tighten with a screwdriver.
Insert connector [11] to join panels [9].Insert connector [10] to join panels [8].
2
3
4
5
D
D
D
D
1
9
9
11
D
D
8
8
10

Kirra Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au
4
65
2
3
8
92
3
7
M
M
M
M
M
M
M
M
A
A
A
A
A
4
54
5
Slide panels [8] and [9] between the grooves of panels [2], [3], [4]
and [5] to form the back of the unit, as shown.
Insert 8x dowels (A) into the ends of panels [2], [3], [4] and [5]. Attach panel
[7] to the unit and secure with 8x screws (M). Tighten with a screwdriver.

Kirra Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au
5
7 8
2
3
7
14
14
14
14
15
15
J
JJ
J
J
J
J
J
J
J
J
J
2
3
6
6
1
P
P
P
PP
P
Attach the legs [14] and [15] to panel [7] as shown using 24x screw (J) .
Tighten with a screwdriver.
Insert 8x shelf plugs (P) into the end cavities of the cabinet as shown.Insert
the shelf panels [6] and balance on top of the plugs.

Kirra Buffet
mocka.co.nz | mocka.com.au
6
910
12
13
1
12
13
O
O
O
O
N
N
N
N
EE
E
EE
E
EE
E
EE
E
EE
E
EE
E
EE
E
EE
E
Assembly Instructions
Attach 2x wheels (O) and (N) to each panel [12] and [13] as shown,
and secure with 32x screws (E). Tighten with a screwdriver.
Attach door panels [12] and [13] as shown, starting with the back
door first and then the front door. Press the clip down on the back
of the door to assemble the door. Push the clip back up to lock
into place.
back
OK
Note: If the door is not sliding smoothly or
sitting straight, there is a screw in the
middle of the wheel on the bottom of each
door that can be tightened/loosened until
the door is sitting properly.

Kirra Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au
7
1211
16
QQ
QQ
x3 16
17
18
R
R
R
R
x3
Insert 4x small bolts (Q) to panel [16]. Tighten with a screwdriver. Attach panels [17] and [18] to panel [16] and secure with 4x small
locking nuts (R). Tighten with a screwdriver.

Kirra Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au
8
13 14
Slide panel [19] down along the grooves of panels [17] and [18]. Attach panel [17], [18] and [20] as shown using 4x screws (B). Tighten with
a screwdriver.
16
17
18
19
x3
17
18
20
B
B
BB
x3

Kirra Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au
9
15 16
16
17
18
E
E
E
E
H
I
x3
16
16
16
1
Attach slide rails (I) and slide rails (H) to the underside of the side
panels as shown. Secure with 4x screws (E) and tighten with a
screwdriver.
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails.

Kirra Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au
10
17 18
8
9
V
Z
W
V
Z
W
K
K
K
K
L
L
L
L
K
L
1
Y
XZ
Attach 4x wedges (K) into the corners of the back of the unit and secure with
4x screws (L). Tighten with a screwdriver.Attach 1x safety strap (V) to the top
of the back side of the unit as shown using 1x washer (Z) and 1x screw (W).
Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is
balanced and steady before use. You’re done, enjoy!