Mocka Zara User manual

Zara Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x12
x8
A B C D EFGH
JKLMN
I
O P
Hardware Supplied
dowel
x20
screw
x6
screw
x24
l ocking
nut x12
screw
x8
x8
wedge screw
x2
bracket
x6
bracket
cover
x2
seal
x2
Phillips & Flathead screwdrivers
hinge
x4
shelf plug
x8
height
adjuster
x2
R
felt
pad
x4
bolt
x24
S
x1
Allen
key
T
screw
x12

Zara Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Attach
2x bracket (M) to panel [1] and secure with 4x screws (E). Place 2x cover (N)
over the bracket (M) as shown. Tighten with a screwdriver.
Insert 4x bolts (C) into panel [5] and panel [6] tighten with a screwdriver.
C
1
C
C
C
C
C
C
C
EE
N
MM
M
E
6
5
C
C
C
C
M
E

Zara Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [5] and [6] to panel [7] with 4x dowels (A) and secure with 4x
locking nuts (D). Tighten with a screwdriver.
Attach panel [3], [4], [5] and [6] to panel [1] with 8x dowels (A) and secure
with 8x locking nuts (D). Tighten with a screwdriver.
A
A
A
AD
D
D
D
D
A
A
A
A
A
A
A
5
6
7
5
6
3
4
D
D
D
D
D
D
1

Zara Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Slide panels [8] and [9] down along the grooves between panels
[3], [4], [5] and [6] to form the back of the unit as shown.
Attach panel [2] to panels [3] ,[4], [5] and [6] with 8x dowels (A)
and secure with 8x screws (B). Tighten with a screwdriver.
5
6
3
4
8
8
9
A
B
A
B
A
B
B
A
B
B
A
B
B
2
5
6
3
4

Zara Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach 6x leg brackets (P) to legs [10] and [14] using 12x screws (T).
Tighten with a screwdriver. Attach legs [10] and [14] to panel [2] using
24x bolts (L). Tighten with an Allen key (S). Screw the height adjuster (I)
onto the leg [14]. Attach 4x felt pads (R) to the ends of the legs [10].
Attach 4x hinges (G) to panels [11] and [12] using 8x screws (F),
and attach 2x seals (O) to panels [11] and [12] and secure with 2x
screw (E). Tighten with a screwdriver.
T
P
14
L
10
L
14
L
10
14
L
L
L
10
10
I
I
L
I
14
2
E
O
E
O
FF
FF
FF
FF
G
G
G
G
11
12
FF
G
R
R
R
R
S

Zara Entertainment Unit
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach hinges on panels [11] and [12] to the unit using 16x screws (F).
Tighten with a screwdriver. Ensure the doors open and close easily. If the
cover (N) is not catching on the seal (O), adjust the magnetic end by twisting
it outwards.
Insert 8x shelf plugs (H) into the unit at the desired height for the shelves
and rest the shelf panels [13] onto them. Ensure the shelves are balanced
and stable.
F
F
3
4
F
11
12
13
13
H
H
H
NOTE: If the doors are
uneven or there is a gap
in the middle, loosen or
tighten the screw on the
door hinge until they are
sitting flush.
N

Zara Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (K). Tighten with a screwdriver. Attach 1x safety straps (V)
to the top of the back side of the unit as shown using 1x washers (Z) and
1x screws (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and
1x screws (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
1
8
9
8
V
Z
W
K
J
K
J
V
Z
W
X
Y
Z
wall
anchor
screw
strap
washer