Mocka Sonata Bed User manual

A B C D E F
GHJ K LI
Hardware Supplied
28mm
screw x6
30mm
screw x3
18mm
screw x4
52mm
screw x2
16mm
screw x8
socket
nut x 4
5mm allen
key x1
spanner
x1
single
cap x24
double
cap x12
4mm allen
key x2
nut
x8
*IMPORTANT NOTICE*
When moving the bed, please lift o the ground with two
people. DO NOT drag, push or pull the bed across the
oor, as this can result in damage to the supporting leg.
Sonata Bed - King Single
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
To assemble the bed head, attach the side panels as shown using 4x
16mm screws (E) and tighten with the 5mm allen key (I). Do not
completely tighten the screws until the complete frame is built.
Attach the bed end to the side panels using 4x 16mm screws (E) and
secure with the 5mm allen key (I).
E
E
I
IE
E
I
I
E
E
E
E
E
E
E
E
Sonata Bed - King Single
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
To assemble the bed head, attach the side panels as shown using 4x
16mm screws (E) and tighten with the 5mm allen key (I). Do not
completely tighten the screws until the complete frame is built.
Attach the bed end to the side panels using 4x 16mm screws (E) and
secure with the 5mm allen key (I).
E
E
I
IE
E
I
I
E
E
E
E
E
E
E
E
34
Assemble the cross bar as shown using 4x 18mm screws (A) and
secure with 4x socket nuts (G), and tighten with the 4mm allen key (H).
Attach the end cross bars with 4x 28mm screws (B) and 4x nuts (F),
tightening with the 4mm allen key (H) and spanner (J) as shown.
Attach the ends of the long cross bar with 2x 28mm screws (B) and 2x nuts
(F). Secure it in the middle with a leg support using 1x 30mm screw (C), 2x
52mm screws (D) and 2x nuts (F). Attach the remaining two leg supports
with 2x 30mm screws (C). Now tighten all the screws in the completed frame.
A
A
B
F
J
H
H
H
H
G
H
H
H
H
C
B
J
F
C
D
D
J
F
F
A
G
A
G
B
F
B
F
B
F
B
F
C
D
F
C
C
B
B
F
F
Sonata Bed - King Single
3
mocka.co.nz | mocka.com.au
Assembly Instructions

5
Join the bed planks together in the middle of the frame using 12x
double caps (L). Attach 24x single caps (K) onto the ends of the bed
planks. Insert the planks into the bed frame using the cap ends.
Lift the bed into the desired location, do not drag, You’re done, enjoy!
THIS SIDE UP
K
L
K
L
K
K
K
Sonata Bed - King Single
Assembly Instructions
4
mocka.co.nz | mocka.com.au