Mocka Oli Bookcase User manual

A
Phillips & Flathead screwdrivers required
Hardware Supplied Wall Strap
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
44x
bolt
B
44x
locking nut
W
3x
wall strap
X
3x
anchor
C
36x
dowel
D
3x
latch
F
6x
hinge
G
3x
stopper
H
6x
screw
Y
3x
screw
Z
3x
washer
J
20x
cover
K
12x
screw
L
12x
wedge
3x
wall screw
E
18x
screw
I
1x
adjuster
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Oli Bookcase
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Firmly screw 4x leg [12] and 1x leg [14] to the base of panel [2].
Screw adjuster (I) into leg [14] and level to floor if needed.
Attach 8x bolt (A) to panel [2].
Tighten with a screwdriver.
2
2
2
14
12 12
12 12
I
14
I
gap
Oli Bookcase
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

34
Insert 8x dowel (C) into panel [2].
Attach panels [5], [6] and [7] to panel [2] with 8x locking nut (B).
Tighten with a screwdriver.
Attach 3x stopper (G) to panels [6] and [7] with 6x screw (H).
Tighten with a screwdriver.
Slide 3x panel [10] into the groves in panels [5], [6] and [7] to form the
back of the unit as shown.
7
6
5
5
7
6
5
5
2
10 10
10
Oli Bookcase
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

56
Attach 1x latch (D) to panel [11] with 2x screw (E).
Attach 2x hinge (F) to panel [11] with 4x screw (E).
Tighten with a screwdriver.
Insert the bottom hinge (F) attached to panels [11] into the groves on
panel [2].
x3
11
11
11 11
2
Oli Bookcase
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

78
Attach 8x bolt (A) to the bottom side of panel [3].
Tighten with a screwdriver.
Insert 8x dowel (C) into panels [5], [6] and [7].
Attach panel [3] to panels [5], [6] and [7] with 8x locking nut (B) making
sure the top hinge (F) attached to panels [11] insert into the groves on
panel [3]. Attach 6x bolt (A) to the top side of panel [3].
Tighten with a screwdriver.
3
3
7
6
5
5
11 11 11
Oli Bookcase
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

910
Attach 2x bolt (A) to panel [8].
Attach panel [13] to panel [8] with 2x locking nut (B).
Tighten with a screwdriver.
Insert 4x dowel (C) into panel [3].
Attach panels [8] and [13] to panel [3] with 6x locking nut (B).
Tighten with a screwdriver.
Place 4x cover (J) over locking nuts.
8
13
8
13
8
13
3
x2
Oli Bookcase
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

11
12
Attach 6x bolt (A) to the bottom side of panel [4].
Attach 6x bolt (A) to the bottom side of panel [1].
Attach 3x wall strap (W) to panel [1] with 3x screw (Y).
Tighten with a screwdriver.
Insert 4x dowel (C) to panels [8].
Attach panel [4] to panels [8] and [13] with 6x locking nut (B).
Attach 6x bolt (A) to the top side of panel [4].
Tighten with a screwdriver.
Place 4x cover (J) over locking nuts on panel [8].
44
1
8
8
13
Oli Bookcase
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

13 14
Insert 6x dowel (C) into panel [4].
Attach 3x panel [9] to panel [4] with 6x locking nut (B).
Tighten with a screwdriver.
Place 6x cover (J) over locking nuts.
Insert 6x dowel (C) into panel [9].
Attach panel [1] to panels [9] with 6x locking nut (B).
Tighten with a screwdriver.
Place 6x cover (J) over locking nuts.
9
9
9
9
9
9
4
1
Oli Bookcase
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

15 16
Place 12x wedge (L) onto the back of panels [10].
Attach wedges to panels [2] and [3] with 12x screw (K).
Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag.
Use a drill to create a small hole lining up with the safety straps (W).
Fasten to the wall using 3x wall anchor (X), 3x washer (Z) and 3x wall screw.
Ensure unit is balanced and steady before use. You’re done, enjoy!
10 10
wall screw
10
10
wall screw
wall screw
3
2
Oli Bookcase
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions