Mocka Hamptons User manual

Hamptons Dining Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au |
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
55mm screw
x4
B
30mm screw
x14
C
spring
washer
x18
D
screw pin
x2
E
dowel
x2
F
allen key
x1
Read the instructions carefully. Refer to the hardware and furniture parts list for
guidance. Be sure all of the pans are complete before assembling. Place all of the
wooden furniture parts on a clean and flat soft surface to prevent scratches.
Refer to the steps provided as an assembling guide.
CAUTION :
1. Do not tighten the nuts or nut bolts completely until they are all in place.
2. To avoid thread damage, avoid overtightening nuts or nut bolts.
3. Hardware is to be kept out of reach of children.

12
Hamptons Dining Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au |
Attach 1 x cental rail (3) to 1 x table leg (2) to assembled frame and
secure with 6 x 30mm screws (B), 1 x dowel (E), 7 x spring washers
(C), 1 x screw pin (D) and 1 x 55 screw (A). Tighten with an Allen Key
(F).
F
C
B
1
Attach 1 x table leg (2) to 1 x cental rail (3) to 1 x table top (1) and
secure with 6 x 30mm screws (B), 1 x dowel (E), 7 x spring washers
(C), 1 x screw pin (D) and 1 x 55 screw (A). Tighten with an Allen Key
(F).
2
3
1
EF
C
DA
C
B
F

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au |
Attach 2 x support bars (4) to assembled frame and secure with 2 x
35mm screws (B), 4 x spring washers (C) and 2 x 55mm screws (A).
Tighten with an Allen Key (F).
Once assembled lift furniture into place, do not drag. Ensure unit
is balanced and steady before use. You’re done, enjoy!
Hamptons Dining Table
4
B
C
F
F
C
A
4