Mocka Bronte User manual

Bronte Two Door Cabinet
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
screw
x24
G
locking nut
x12
M
screw
x12
H
dowel
x12
I
allen key
x1
J
screw
x4
K
screw
x10
C
screw
x4
D
handle
x2
E
screw
x4
F
bolt
x12
B
hinge
x4
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: Any furniture that is not anchored to a wall
has the potential to tip over in certain circumstances, ie. if a
child attempts to climb on the furniture or in the event
of an earthquake. Accordingly, we recommend that all
furniture is anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend these are
used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that
different wall materials may require different fixing devices
from those supplied.
Wall
attachment
P
screw
x2
Q
wall plug
x2
O
screw
x2
N
wall strap
x2
L
brace
x12
R
support
x4

12
Bronte Two Door Cabinet
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [4] and [5] to panel [1] and secure with 4 x bolts (F), 2 x
dowels (H) and 4 x locking nuts (G). Tighten with a screwdriver.
Attach panel [2] to assembled frame and secure with 4 x bolts (F),
4 x dowels (H) and 4 x locking nuts (G). Tighten with a screwdriver.
6
5
42
1
F
F
F
F
G
G
G
G
H
H
1
5
4

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [8] to assembled frame and secure with 4 x bolts (F),
4 x dowels (H) and 4 x locking nuts (G). Tighten with a screwdriver.
Attach panel [9] to assembled frame and secure with 4 x screw (C) and
4 x dowels (H). Tighten with a screwdriver.
Bronte Two Door Cabinet
4
9
8
67
2
2
1
1
C
F
G
HH

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [12]，[13] to assembled frame as shown and secure with 4 x
bolts (J) and 6 x screws (K). Tighten bolts with an Allen Key (I) and
screws with screwdriver.
Attach 2 x handles (D) to panels [10] and [11] and secure with 4 x screws
(E). Attach panels [10] and [11] to assembled frame and secure with 2 x
hinges (B) and 16 x screws (A). Insert the shelf support (R),and put the shelf [3]
into cabinet. Tighten with a screwdriver.
Bronte Two Door Cabinet
6
I
J
I
J
K
10
3
13
13 12
12
11
E
A
A
D
B
B
R
R

7
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 12 x braces (L) to assembled frame and secure with 12 x screws
(M). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (N). Fasten
to the wall using 2x wall anchors (Q), 2x screws (O) and 2x screws (P).
Ensure unit is balanced and steady before use. You’re done, enjoy!
Bronte Two Door Cabinet
8
M
L
P
N
O
Q
7
6
6