Mocka Parker Bedside Table User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those supplied.
Phillips & Flathead screwdrivers and hammer required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B1 B2 C
DEFG
H I J
Hardware Supplied
50mm
screw x8
30mm
screw x8
bolt &
nut x18
12mm
screw x8
25mm
screw x2
wall
anchor x2
wall
strap x2
14mm
screw x2
dowel
x8
50mm
screw x4
slide
rail x2
E1
E2
E4
E3
Parker Bedside Table
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach the leg panels together as shown using 8x 50mm screws (B1).
Tighten with a screwdriver.
Attach panel [2] to the legs using 8x 30mm screws (B2). Tighten with a
screwdriver. Insert 4x bolts (A) into panel [2].
B1
B1
B1
B1
B1
B1
B1
B1
2
B2
B2
B2
B2
B2
B2
B2
B2
A
A
A
A
Parker Bedside Table
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach the leg panels together as shown using 8x 50mm screws (B1).
Tighten with a screwdriver.
Attach panel [2] to the legs using 8x 30mm screws (B2). Tighten with a
screwdriver. Insert 4x bolts (A) into panel [2].
B1
B1
B1
B1
B1
B1
B1
B1
2
B2
B2
B2
B2
B2
B2
B2
B2
A
A
A
A
34
Insert 2x bolts (A) and attach 1x slide rail (E1) to panel [3] using 2x
12mm screws (C). Insert 2x bolts (A) and attach 1x slide rail (E3) to
panel [4] using 2x 12mm screws (C). Tighten with a screwdriver.
Attach panels [3], [4] and [5] together using 4x locking nuts (A). Tighten
with a screwdriver.
A
E3
C
C
E1
4
3
4
3
A
AA
5
A
A
A
A
A
A
Parker Bedside Table
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach panels [3], [4] and [5] to panel [2] using 4x dowels (F) and 4x
locking nuts (A). Tighten with a screwdriver.
Insert 6x bolts (A) into panel [1].
5
4
3
2
1
FF
F
F
A
A
A
A
A
A
A
A
A
Parker Bedside Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panels [3], [4] and [5] to panel [2] using 4x dowels (F) and 4x
locking nuts (A). Tighten with a screwdriver.
Insert 6x bolts (A) into panel [1].
5
4
3
2
1
FF
F
F
A
A
A
A
A
A
A
A
A
A
78
Attach panels [7], [8] and [9] together with 4x 50mm screws (D). Slide
panel [10] along the grooves between panels [7] and [8]. Attach panel
[6] to panels [7] and [8] with 4x nut and bolt sets (A). Attach 1x slide rail
(E2) to panel [7] and 1x slide rail (E4) to panel [8] using 4x 12mm
screws (C). Tighten with a screwdriver.
10
9
8
7
8
7
6
8
7
C
D
E2
E4
A
D
C
C
C
A
A
Attach panel [1] to panels [3], [4] and [5] using 4x dowels (F) and 6x
locking nuts (A). Tighten with a screwdriver.
1
A
A
A
5
4
3
2
FF
F
F
A
A
A
AA
Parker Bedside Table
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
I
J
Move the unit into the desired location up against a wall. Attach 2x wall
straps (J) to the back sides of panel [1] and secure with 2x 14mm screws
(H). Fasten to wall using 2x wall anchors (I) and 2x wall screws (G).
Ensure unit is balanced and steady before use. You’re done, enjoy!
H
H
Safety Straps
G
1
Insert the drawer as shown, ensuring it slides smoothly and easily along
the rails. Once assembled lift the furniture into place, do not drag.
6
Parker Bedside Table
Assembly Instructions
6
mocka.co.nz | mocka.com.au