Mocka Sonata User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Sonata
Bed - Single
Thank you for your purchase.
Please follow the instructions below for correct assembly
A
Socket Screw
20mm x8
B C
Socket Screw
12mm x4
Socket Screw
30mm x4
E
Nut 6mm
x8
F
Cap
x24
Z
Y
x1
Allen key 4mm
x1
Allen key 5mm
X
x1
Wrench 6mm
Hardware Supplied
*IMPORTANT NOTICE*
D
Socket Screw
52mm x4
people. DO NOT drag, push or pull the bed across the

1
Sonata
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
2
Bed - Single
2
E
Z
X
D
A
Z
E
DD
E
D
E
A
A
3
4
5 5
3
7
4
Assemble each side by attaching the support leg [5] to its two corresponding
side panels [3] & [4] with 4x 52mm socket screws (D) and 4x 6mm nuts (E).
Tighten with the 4mm allen key (Z) and wrench (X).
Attach both sides of the bed to the centre bar [7] with 4x 12mm socket
screws (A) and tighten with the 4mm allen key (Z).

Sonata
Bed - Single
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach the bed-ends [1] & [2] to the side panels [3] & [4] using the 20mm socket
screws (B) with the 5mm allen key (Y).
3 4
Fix the outer support bars [6] to the bed frame using the 4x 30mm socket
screws (C) and 4x Nuts (E) with the 4mm Allen Key (Z) and wrench (X).
X
Z
E
C
B
Y
1
26

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Sonata
Bed - Single
5 6
Insert caps (F) onto the ends of 12x bed planks, then using the cap ends
insert the planks into bed frame.
Lift the furniture into the desired location, do not drag. You’re done, enjoy!
F