Mocka Vibe Puzzle Drawers User manual

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
WARNING: Any furniture that is not anchored to a wall has the potential to tip over
in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend that all furniture is anchored to
a wall. We supply a free safety wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing device provided should fit
most wall types, but please note that different wall materials may require different
fixing devices from those supplied.
Phillips & Flathead screwdrivers required
A B CDE
F G H
Hardware Supplied
dowel
x40
screw
x20
bolt
x64
locking
nut x64
small
screw x9
long
screw x36
long
screw x12
stopper
x9
I
wedge
x6
J
screw
x6
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Vibe Puzzle Drawers
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

Panel Layout
9
8
8
8
7
6
5
4
3
2
1
11
10
11
Vibe Puzzle Drawers
2
mocka.co.nz | mocka.com.au
Assembly Instructions

Panel Layout
9
8
8
8
7
6
5
4
3
2
1
11
10
11
12
Attach 2x stoppers (H) to panel [4] with 2x small screws (F). Insert 8x
bolts (A) and 8x dowels (C) into panel [1]. Insert 2x bolts (A) into panel
[4].
Insert 4x bolts (A) and 4x dowels (C) into panel [3] and repeat with panel
[2].
A
A
A
A
A
A
A
A
C
C
C
C
C
C
C
C
1
32
A
C
A
A
C
C
A
C
A
A
4
F
H
F
H
Vibe Puzzle Drawers
3
mocka.co.nz | mocka.com.au
Assembly Instructions

34
Attach 2x stoppers (H) to the front side of panel [5] with 2x small screws
(F). Insert 2x dowels (C) into the front side of panel [5]. Now insert 2x
bolts (A) and 2x dowels (C) into the back side of panel [5].
Attach 3x stoppers (H) to the front side of panel [6] with 3x small screws
(F). Insert 4x dowels (C) into the front side of panel [6]. Now insert 4x
bolts (A) and 4x dowels (C) into the back side of panel [6].
6
front
C
C
6
back
A
ACC
H
F
H
C
C
C
C
A
A
C
C
5
front
5
back
AC
A
C
H
F
H
H
Vibe Puzzle Drawers
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
34
Attach 2x stoppers (H) to the front side of panel [5] with 2x small screws
(F). Insert 2x dowels (C) into the front side of panel [5]. Now insert 2x
bolts (A) and 2x dowels (C) into the back side of panel [5].
Attach 3x stoppers (H) to the front side of panel [6] with 3x small screws
(F). Insert 4x dowels (C) into the front side of panel [6]. Now insert 4x
bolts (A) and 4x dowels (C) into the back side of panel [6].
6
front
C
C
6
back
A
ACC
H
F
H
C
C
C
C
A
A
C
C
5
front
5
back
AC
A
C
H
F
H
H
56
Attach 2x stoppers (H) to panel [7] with 2x small screws (F). Insert 2x
dowels (C).
Insert 2x bolts (A) and 2x dowels (C) into panel [9] and repeat for panel
[10].
7
C
C
9
A
A
A
A
C
C
C
C
H
F
H
C
A
H
10
Vibe Puzzle Drawers
Assembly Instructions
5
mocka.co.nz | mocka.com.au

78
Secure panel [8] to panel [5] with 2x long screws (G) and 2x locking
nuts (B). Secure panel [9] to panel [5] with 2x locking nuts (B). Tighten
with a screwdriver.
Attach panel [8] to panel [6] with 2x long screws (G). Now attach the rest
of the panels to [8] and [6] with 2x long screws (G) and 2x locking nuts
(B). Tighten with a screwdriver.
B
6
8
9
5
G
B
G
G
G
B
B
B
G
G
B
8
Vibe Puzzle Drawers
Assembly Instructions
6
mocka.co.nz | mocka.com.au

78
Secure panel [8] to panel [5] with 2x long screws (G) and 2x locking
nuts (B). Secure panel [9] to panel [5] with 2x locking nuts (B). Tighten
with a screwdriver.
Attach panel [8] to panel [6] with 2x long screws (G). Now attach the rest
of the panels to [8] and [6] with 2x long screws (G) and 2x locking nuts
(B). Tighten with a screwdriver.
B
6
8
9
5
G
B
G
G
G
B
B
B
G
G
B
8
910
Attach panel [10] to panel [7] with 2x locking nuts (B). Attach panel [12] to panel
[7] with 2x long screws (G). Attach panel [8] to the rest of the unit using 2x
locking nuts (B) and 2x dowels (C). Attach panel [10] to panel [6] with 2x locking
nuts (B).
Attach side panels [2] and [3] to the main unit with 8x locking nuts (B)
and tighten with a screwdriver.
10
7
B
B
3
2
B
B
G
G
B
B
C
C
B
B
8
Vibe Puzzle Drawers
Assembly Instructions
7
mocka.co.nz | mocka.com.au

11
12
Slide the 2x back panels [11] along the grooves at the back of the unit,
one from the bottom and one from the top.
Attach panel [1] to the main unit and secure with 8x locking nuts (B).
Tighten with a screwdriver.
B
B
1
11
11
Vibe Puzzle Drawers
Assembly Instructions
8
mocka.co.nz | mocka.com.au

11
12
Slide the 2x back panels [11] along the grooves at the back of the unit,
one from the bottom and one from the top.
Attach panel [1] to the main unit and secure with 8x locking nuts (B).
Tighten with a screwdriver.
B
B
1
11
11
13 14
Insert 6x dowels (C) and 2x bolts (A) into the holes at the top of the unit
as shown. Attach panel [4] to the top of the unit and secure with 4x long
screws (G). Tighten with a screwdriver.
Attach each leg [12] to the base of the table with 5x screws (E) and
tighten with a screwdriver.
12
12
E
E
E
E
E
12
4
G
G
G
G
C
C
C
CB
B
Vibe Puzzle Drawers
Assembly Instructions
9
mocka.co.nz | mocka.com.au

15 16
Attach side panels [14] & [26] to panel [13] using 4x bolts (A) and 4x
locking nuts (B). Slide panel [16] between the grooves of the side panels.
Secure panel [15] to the rest of the drawer with 4x long screws (D) and
tighten with a screwdriver. Repeat with the other two drawers of this size.
Attach side panels [14] & [26] to panel [17] using 4x bolts (A) and 4x
locking nuts (B). Slide panel [19] between the grooves of the side panels.
Secure panel [18] to the rest of the drawer with 4x long screws (D) and
tighten with a screwdriver. Repeat with the other two drawers of this size.
Drawers x3
Drawers x3
14
14
26
26
17
19
18
D
D
13
16
15
D
D
B
B
B
B
AA
A
A
B
B
B
B
AA
A
A
Vibe Puzzle Drawers
10
mocka.co.nz | mocka.com.au
Assembly Instructions

15 16
Attach side panels [14] & [26] to panel [13] using 4x bolts (A) and 4x
locking nuts (B). Slide panel [16] between the grooves of the side panels.
Secure panel [15] to the rest of the drawer with 4x long screws (D) and
tighten with a screwdriver. Repeat with the other two drawers of this size.
Attach side panels [14] & [26] to panel [17] using 4x bolts (A) and 4x
locking nuts (B). Slide panel [19] between the grooves of the side panels.
Secure panel [18] to the rest of the drawer with 4x long screws (D) and
tighten with a screwdriver. Repeat with the other two drawers of this size.
Drawers x3
Drawers x3
14
14
26
26
17
19
18
D
D
13
16
15
D
D
B
B
B
B
AA
A
A
B
B
B
B
AA
A
A
17 18
Attach side panels [14] & [26] to panel [22] using 4x bolts (A) and 4x
locking nuts (B). Slide panel [24] between the grooves of the side
panels. Secure panel [23] to the rest of the drawer with 4x long screws
(D) and tighten with a screwdriver.
Attach side panels [25] & [27] to panel [20] using 4x bolts (A) and 4x
locking nuts (B). Slide panel [19] between the grooves of the side panels.
Secure panel [21] to the rest of the drawer with 4x long screws (D) and
tighten with a screwdriver. Repeat with the other drawer of this size.
Drawers x2
Drawers x1
19
25
20
21
D
D
24
23
14
26
22
D
D
27
A
B
B
B
B
A
A
A
B
B
B
B
AA
A
A
Vibe Puzzle Drawers
11
mocka.co.nz | mocka.com.au
Assembly Instructions

19 20
Insert each completed drawer into its corresponding position as shown. Attach 6x wedges (I) as shown using 6 x screws (J). Attach the safety
strap (V) to the top of the back side of the unit using 1x screw (W) and 1x
washer (Z). Tighten with a screwdriver.
Safety Strap
JJ
J
J
I
I
I
I
J
I
J
I
V
Z
W
screw
strap
washer
20
20 22
17 17
17
13
13
13
Vibe Puzzle Drawers
12
mocka.co.nz | mocka.com.au
Assembly Instructions

19 20
Insert each completed drawer into its corresponding position as shown. Attach 6x wedges (I) as shown using 6 x screws (J). Attach the safety
strap (V) to the top of the back side of the unit using 1x screw (W) and 1x
washer (Z). Tighten with a screwdriver.
Safety Strap
JJ
J
J
I
I
I
I
J
I
J
I
V
Z
W
screw
strap
washer
20
20 22
17 17
17
13
13
13
21 22
Lift the furniture into the desired location, do not drag. Attach the other
end of the safety strap (V) to the wall using 1x screw (Y), 1x wall plug
(X) and 1 x washer (Z). Tighten with a screwdriver.
You’re done, enjoy!
wall
anchor
wall
screw
Washer
Strap
X
Z
Y
V
Vibe Puzzle Drawers
13
mocka.co.nz | mocka.com.au
Assembly Instructions