Mocka Parker Buffet User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those supplied.
Phillips & Flathead screwdrivers and hammer required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B1 B2 C1
DEFG
KI J
Hardware Supplied
50mm
screw x8
30mm
screw x12
bolt &
nut x16
14mm
screw x24
hinge
x4
wall
anchor x2
wall
strap x2
dowel
x16
shelf
plug x8
wedge
x10
C2
18mm
screw x10
H
nail
x4
25mm
screw x2
14mm
screw x2
L
Parker Buffet
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach the leg panels together as shown using 8x 50mm screws (B!).
Tighten with a screwdriver.
Attach panel [2] to the leg panels using 12x 30mm screws (B2). Tighten
with a screwdriver. Insert 6x bolts (A) into panel [2].
B1
B2
B2
B2
B1
B2
B1
B2
B1
B2
B1
B2
B1
B2
B1
B2
B1
B2
B2
B2
2
A
A
A
A
A
A
Parker Buffet
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach the leg panels together as shown using 8x 50mm screws (B!).
Tighten with a screwdriver.
Attach panel [2] to the leg panels using 12x 30mm screws (B2). Tighten
with a screwdriver. Insert 6x bolts (A) into panel [2].
B1
B2
B2
B2
B1
B2
B1
B2
B1
B2
B1
B2
B1
B2
B1
B2
B1
B2
B2
B2
2
A
A
A
A
A
A
34
Attach panels [3] and [5] to panel [6] using 4x dowels (F) and 4x nut
and bolt sets (A). Tighten with a screwdriver.
Attach panels [3], [5] and [4] as shown using 6x dowels (F) and 6x
locking nuts (A). Tighten with a screwdriver.
A
6
54
3
2
5
3
F
F
F
F
F
F
A
F
A
F
A
F
A
A
A
A
A
A
Parker Buffet
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Slide panel [7] down along the grooves between panels [3] and [4] to
form the back of the unit.
7
54
3
Insert 6x bolts (A) into panel [1].
1
A
A
A
A
A
A
Parker Buffet
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Slide panel [7] down along the grooves between panels [3] and [4] to
form the back of the unit.
7
54
3
Insert 6x bolts (A) into panel [1].
1
A
A
A
A
A
A
78
Attach panel [1] to panels [3], [5] and [4] using 6x dowels (F) and 6x
locking nuts (A). Tighten with a screwdriver.
1
54
3
F
F
F F
F
F
A
A
A
A
Insert 8x shelf plugs (D) into panels [5] at the desired shelf heights.
54
D
D
D
D
D
D
Parker Buffet
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Insert the shelf panels [10], resting them on top of the shelf plugs (D).
10
10
Attach door panel [8] to panel [3] using 1x hinge (H) and secure with 6x
14mm screws (C1). Attach door panel [9] to panel [4] using 1x hinge
(G) and secure with 6x 14mm screws (C1). Tighten with a screwdriver.
C1
9
8
4
3
G
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting ush.
Parker Buffet
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Insert the shelf panels [10], resting them on top of the shelf plugs (D).
10
10
Attach door panel [8] to panel [3] using 1x hinge (H) and secure with 6x
14mm screws (C1). Attach door panel [9] to panel [4] using 1x hinge
(G) and secure with 6x 14mm screws (C1). Tighten with a screwdriver.
C1
9
8
4
3
G
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting ush.
11
12
Secure panel [7] against the internal panels [5] and [6] as shown using
4x nails (H). Attach 10x wedges to panel [8] using 10x 18mm screws (C).
Tighten with a screwdriver. Once assembled lift furniture into position, do
not drag.
7
E C2
H
E
E
H
E
H
E
H
E
E
E
E
E
E
J
K
L
Move the unit into the desired location up against a wall. Attach 2x
wall straps (L) to the back sides of panel [1] and secure with 2x 14mm
screws (J). Fasten to wall using 2x wall anchors (K) and 2x wall
screws (I). Tighten with a screwdriver. Ensure unit is balanced and
steady before use. You’re done, enjoy!
Safety Straps
I
J
Parker Buffet
Assembly Instructions
7
mocka.co.nz | mocka.com.au