Mocka Kirra Bookcase User manual

Kirra Bookcase
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
wall
anchor
x2
XWV
wall
screw
x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B C D E F G
H J K L M NI
Hardware Supplied
dowel
x18
screw
x15
screw
x32
screw
x8
wheel
x4
wheel
x4
allen key
x1
shelf plug
x8
small
bolt
x12
long bolt
x24
nut
x14
wedge
x8
bolt
x6
locking
nut x6

Kirra Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
C
C
C
C
C
C
A
A
B
B
B
Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver. Attach panel [7] to panel [8] with 2x dowels (A) and secure
with 3x screws (B) as shown. Tighten with a screwdriver.
1
7
8
B

Kirra Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [10] to panels [9] and [16], secure with 6x small bolts (N).
Tighten with an allen key (L).
Attach panels [9], [16] to panels [8] with 4x dowels (A) and secure
with 6x screws (B) as shown. Tighten with a screwdriver.
N
N
N
8
9
9
16
10
N
N
N
10
B
B
B
A
A
8
16
B
B
B
A
A
N
L

Kirra Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panels [3], [4], [5] to panel [1] with 6x dowels (A) and secure
with 6x locking nut (D) as shown. Tighten with a screwdriver.
Slide panels [6] down along the grooves between the panels [3], [4] and [5].
A
A
A
A
A
A
D
D
D
D
D
1
4
4
3
3
5
5
6
6
D

Kirra Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panels [10] to panel [2], secure with 6x small bolts (N).
Tighten with an allen key (L).
Attach panel [2] to panels [3], [4] and [5] with 6x dowels (A) and secure
with 6x screws (B) as shown. Tighten with a screwdriver.
B
B
4
3
5
2
2
10
10
N
N
N
N
N
N
A
A
B
B
A
B
B
A
L

Kirra Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Attach panel [12] to panels [2], [7], [9], [11] and [16] with 9x long bolts (F)
and secure with 4x nuts (G) as shown. Tighten with an allen key (L).
Attach panel [13] to panels [2], [7], [9], [11] and [16] with 9x long bolts (F)
and secure with 4x nuts (G) as shown. Tighten with an allen key (L).
F
F
F
F
F
F
F
F
F
F
×
F
L
11
12
13
7
7
99
16
16
22
G
G
G
G
G
F
FF
F
F
F
F
F
F
L
G
11

M
M
M
4
3
5
12
13
17
17
17
H
I
Kirra Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Insert 8x shelf plugs (M) into the unit at the desired height for the shelves
and rest the shelf panels [17] onto them. Ensure the shelves are balanced
and stable.
Attach panels [8] to panels [12] and [13] with 6x long bolts (F)
and secure with 6x nuts (G) as shown. Tighten with an allen key (L).
Attach 8x wedges (H) to the back of the unit as shown, and secure
with 8x screws (I). Tighten with a screwdriver.
G
F
L
G
F
G
F
G
F
G
F
G
F
8
8
8
H
I
6
6
Align the Shelf Support
to the hole of Adjustable
Shelf Panel.

Note: If the door is not sliding
smoothly or sitting straight, there
is a screw in the middle of the
wheel on the bottom of each door
that can be tightened/loosened
until the door is sitting properly.
back
OK
Kirra Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1413
Attach panels [14] and [15] as shown, starting with the back
door [14] first and then the front door [15]. Press the clip down
on the back of the door to assemble the door. Push the clip
back up to lock into place.
Attach 4x wheels (J) and (K) to panels [14] and [15] as shown,
and secure with 32x screws (E). Tighten with a screwdriver.
J
EEE
J
EEE
K
EEE
K
EEE
J
EEE
J
EEE
K
EEE
K
EEE
14
14
15
15

Kirra Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1615
You’re done, enjoy!
Slide panels [6] down along the grooves between the panels [3], [4] and [5].
Once assembled lift furniture into place, do not drag. Fasten to the
wall using 2x washers (x), 2x wall anchors (v) and 2x wall screws (w).
Ensure unit is balanced and steady before use.
X
X
W
W
V
V
11
Twist the adjustor if necessary