Mocka Sintra Six Drawer User manual

Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
Hardware Supplied
P
long
dowel
x2
Q
bolt
x46 x8
A B C D EFGHK
LMN
I
O R S
dowel
x24
screw
x78
slide
rail x6
slide
rail x6
slide
rail x6
slide
rail x6
locking
nut x46
screw
x44
J
wedge screw
bolt
x20
long
bolt
x10 x8
x6
bracket
x5
bracket
x1
Allen
key
cover
x6
seal
x6
plastic
glide
T U
x4
adjuster
x1

Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver.
Panel layout
1 4
3
21
C
C
C
C
C
C
1
5
5
6
6
6
6
40
30
31
32
3334
36
35
41
7
8
x6
x4

Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
23
Attach 3x slide rails (R) and 3x slide rails (S) to panel [7] as shwon. secure with
18x screws (E). Insert 4x bolts (C) into panels [7]. Tighten with a screwdriver.
Attach 3x slide rails (R) to panel [3] and secure with 9x screws (E).
Insert 3x bolts (C) into panels [3]. Tighten with a screwdriver. Attach
3x slide rails (S) to panel [4] and secure with 9x screws (E). Insert
3x bolts (C) into panels [4]. Tighten with a screwdriver.
E
E
E
R
R
R
R
R
S
S
S
R
E
E
E
E
E
E
E
E
E
S
S
S
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
C
C
C
C
C
CC
C
C
3
4
7
7
E
S
CR
R
E
CL
R
E
CL
E
S
CR
FLIP

Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54 X4
Attach panels [6] to panel [7] with 2x long dowels (P) and secure with 4x
locking nuts (D). Tighten with a screwdriver.
6
6
6
6
6
EED
EE
N
MM
The round head
is aligned with the
direction of the arrow.
M
D
D
D
P
P
7
Attach 1x bracket (M) to panel [6] and secure with 2x screws (E).
Tighten with a screwdriver. Place 1x cover (N) over the bracket (M)
as shown.
D

Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Attach panel [4] to panels [6] and [8] with 3x dowels (A) and secure
with 3x locking nuts (D). Tighten with a screwdriver. Attach panel [8]
to panel [7] secure with 2x screws (B). Tighten with a screwdriver
Attach panel [3] to panels [6] and [8] with 3x dowels (A) and secure with
3x locking nuts (D). Tighten with a screwdriver.
4
A
A
A
D
D
D
BB
A
A
A
8
7
6
6
8
6
6
3
D
D
D

Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
8 9
Attach panel [1] to panels [3], [4] and [7] with 6x dowel (A) and secure with
6x locking nuts (D). Tighten with a screwdriver.
Slide panels [5] down along the grooves between the panels [3] and
[4] as shown.
A
A
A
A
D
D
D
D
3
4
5
1
3
4
7

Sintra Six Drawer
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
10
Assembly Instructions
11
E
M
M
E
E
E
EE
N
MM
The round head
is aligned with the
direction of the arrow.
5
3
4
2
Attach 2x bracket (M) to panel [2] and secure with 4x screws (E).
Tighten with a screwdriver. Place 2x cover (N) over the bracket (M)
as shown.
Slide panels [5] down along the grooves between the panels [3] and
[4] as shown.

12
Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13
A
A
A
A
B
B
B
B
B
B
40
40
40
40
40
40
41
front
back
F
F
L
H
F
F
F
F
F
F
I
I
G
G
G
G
Q
G
G
2
3
4
7
2
B
Attach panel [2] to panels [3], [4] and [7] with 6x dowel (A) and secure
with 6x screws (B). Tighten with a screwdriver.
Attach 5x leg brackets (F) to legs [40] and [41] using 10x long bolts (H).
Tighten with an Allen key (I). Attach legs [40] and [41] to panel [2] using
20x bolts (G) as shown. Tighten with an Allen key (I). Insert the adjuster
(Q) into the middle support leg [41]. Attach 4x plastic glides (L) to the
ends of the legs [40] using a hammer as shown.
L
L
L
L

Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
14 Drawer x6 15 Drawer x6
Insert 10x bolts (C) into panels [35]/[36]. Attach 1x seal (O) to panel [35]
/[36] and secure with 1x screw (E). Tighten with a screwdriver.
C
C
C
C
C
E
O
35
36
30
31
32
BB
B
B
BB
34
Attach panels [30], [31] and [34] to panel [32] secure with 6x screws (B).
Tighten with a screwdriver.

Sintra Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
16 Drawer x6 17 Drawer x6
Slide panel [33] down along the grooves between the panels [30]
and [31] as shown.
Attach panels [35]/ [36] to panels [30], [31] and [34] with 1x dowel (A) secure
with 5x locking nuts (D). Tighten with a screwdriver.
36
35
34
30
33
31
30
31
D
A
D
D
D
D