Mocka Peyton Bed Queen User manual

Hardware Supplied
Peyton Bed - Queen
1
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
G
35mm
bolt x1
H
25mm
bolt x6
I
left
plate x2
J
right
plate x2
double
cap x14
A
connector
x2
B
25mm
bolt x8
C
spring
washer x8
D
washer
x12
E
nut
x2
F
connector
x2
K
spanner
x1
ON
large allen
key x1
small allen
key x1
M
L
20mm
bolt x16
the supporting leg.

12
Peyton Bed - Queen
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
1a: Attach 1x left plate (I) and 1x right plate (J) to panel [1] and secure
with 4x spring washers (D), 4x washers (E) and 4x 25mm bolts (C).
Tighten with Allen Key (N). Do not completely tighten the screws until
the complete frame is built.
1b: Attach 2x panels [3] to panel [1] as shown and secure with 4x
20mm bolts (L). Tighten with Allen Key (M).
2a: Attach 1x left plate (I) and 1x right plate (J) to panel [2] and secure
with 4x spring washers (D), 4x washers (E) and 4x 25mm bolts (C).
Tighten with Allen Key (N).
2b: Attach 2x panels [3] to panel [2] as shown and secure with 4x
20mm bolts (L). Tighten with Allan Key (M).
I
C
N
1a
M
2b
2a
D
E
D
E
C
I
C
N
D
D
L
C
L
M
1b
L
L
1
3
3
3
3
2
E
E

34
Peyton Bed - Queen
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Join the 4x side panels [3] together with 2x connectors (B) and 2x
connectors (K) and secure with 4x washers (E) and 8x 20mm bolts (L).
Tighten with Allen Key (M).
4a: Insert panel [5] and sit on top of the connector (B) and secure with
2x 25mm bolts (H) and 2x nuts (F). Tighten with Allen Key (M) and
spanner (O).
4b: Attach 2x panel [4] to panels [1] and [2] and secure with 4x 20mm
bolts (L) as shown. Tighten with Allen Key (M).
4c: Attach panels [5] and [4] in the middle with 1x support leg [6] and
secure with 1x 35mm bolt (G). Tighten with Allen Key (M).
4d: Attach 4x support legs (6) to panels [4] and [5] as shown and
secure with 4x 25mm bolts (H). Tighten with Allen Key (M).
L
L
L
L
L
LB
E
EKH
1
1
3
2
3
3
3
4
4
6
6
6
6
6
5
5
5
M
M
4b
4c
4d
4a
GM
M
H
B
F
M
O
F

56
Peyton Bed - Queen
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Lift the bed into the desired location, do not drag, You’re done, enjoy!
A
Join the bed planks together in the middle of the frame using 14x
double caps (A). Insert the end of the planks into the bed frame as
shown and attach the double caps (A) into panel [4]. Make sure the
double caps (A) click securely into place.