Mocka Watson Bedside Table User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
C
dowel
x10
D
long
screw x10
A
bolt
x14
B
locking
nut x14
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
small
screw x16
G
L + R slide
rail x4
H
L + R slide
rail x4
I
nut
x4
J
long bolt
x4
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
Watson Bedside Table
1
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Insert 4 x nuts (I) into panel [14]. Attach panel [13] to panel [14] and
secure with 4 x long bolts (J). Tighten with a screwdriver.
Attach panels [13] and [14] to panel [2] and secure with 4 x long screws
(D). Tighten with a screwdriver.
II
II
Watson Bedside Table
2
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
Attach 2 x L slide rails (G) to panel [3] and secure with 4 x small screw
(E). Attach 2 x R slide rails (G) to panel [4] and secure with 4 x small
screw (E). Tighten with a screwdriver.
Insert 4 x dowels (C) into panel [2]. Insert 2 x dowels (C) into panels [3]
and [4]. Attach panels [3], [4] and [6] and secure with 2 x locking nuts (B).
Attach panels [3] and [4] to panel [2] and secure with 4 x long screws (D).
Tighten with a screwdriver.
A
A
Watson Bedside Table
3
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Slide panel [5] between the grooves on panels [3] and [4] to form the
back of the unit as shown.
Insert 4 x bolts (A) into panel [1]. Attach panel [12] into panel [1] and
secure with 2 x long screws (D). Attach 1 x wall strap (W) and secure
with 1 x screw (Y). Tighten with a screwdriver.
Watson Bedside Table
Assembly Instructions
4
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz |mocka.com.au
78Drawer x 2
Insert 4 x dowel (C) into panel [1]. Attach panel [1] to panels [3] and [4]
and secure with 4 x locking nuts (B). Tighten with a screwdriver.
Insert 4 x bolts (A) into panel [7]. Attach panels [8] and [9] to panel [7]
and secure with 4 x locking nuts (B), Tighten with a screwdriver.
Watson Bedside Table
Assembly Instructions
5
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

9Drawer x 2
Slide panel [11] between the grooves on panels [8] and [9] to form the
base of the drawer as shown. Attach panel [10] to panels [8] and [9]
and secure with 4 x medium screws (F). Attach 2 x slide rails (H) to
panels [8] and [9] and secure with 4 x small screws (E). Tighten with a
screwdriver.
10
Insert each drawer into the unit as shown, ensuring they slide smoothly
and easily along the rails.
Watson Bedside Table
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

11
Move the unit into the desired location up against a wall, do not drag.
Use a drill to create a small hole lining up with the top of the 1 x safety
strap (W) and secure with 1 x wall anchor (X), 1 x washer (Z) and
1 x long screw. Tighten with a screwdriver. Ensure the unit is balanced
and steady before use. You’re done, enjoy!
Watson Bedside Table
Assembly Instructions
7
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558