Mocka Jack User manual

1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
Jack Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x6
wedge
x8
screw
x8
screw
x6
A B C D E F G
HJK L MI
Hardware Supplied
dowel
x12
screw
x24
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x6
cam bolt
x16
handle
x2
N
Allen key
x1
O P
small bolt
x8
small locking
nutx8
long
screw x12
QR
screw
x8

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver. Attach 1x slide rail (F) to panel [3] and secure with 3x screws (E).
Attach 1x slide rail (G) to panel [4] and secure with 3x screws (E).
Tighten with a screwdriver.
C
C
C
C
C
C
1
F
CL
EG
CR
E
E
E
F
G
E
E
E
E
3
4

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach 1x slide rail (F) to panel [5] as shown with 3x screws (E).
Flip the panel [5], attach 1x slide rail (G) to panel [5] as shown
with 3x screws (E). Tighten with a screwdriver.
Attach panels [3], [4] and [5] to panel [1] with 6x dowel (A) and
secure with 6x locking nuts (D). Tighten with a screwdriver.
1
F
CL
EG
CR
E
FLIP
F
G
E
E
E
E
E
E
A
A
A
A
A
A
D
D
D
D
D
5
5
5
3
4
D

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Slide panels [6] down along the grooves between the panels [3] and [4]. Attach panel [2] to the rest of the unit using 6x dowels (A) and secure
with 6x screws (B) as shown. Tighten with a screwdriver.
A
A
B
B
A
B
B
A
B
B
5
5
3
3
4
4
6
6
2
B

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panels [7] to the panels [8] with 16x cam bolts (J) and tighten
with a Allen key (N).
Attach leg panels to the bottom panel [2] with 6x long screws (Q), and tighten
with a screwdriver.
J
J
J
J
J
J
J
N
Q
Q
Q
Q
Q
Q
2
7
7
8
8
8
8
8
8
J
N
Q

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910 Drawers x2
Attach panel [9] to the panels [8] with 6x long screws (Q), and tighten
with a screwdriver.
Insert 4x small bolt (O) into panels [10] and [11].
Tighten with a screwdriver.
Q
Q
Q
Q
Q
Q
O
O
O
O
8
3
8
3
9
3
10 3
11

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 Drawers x2 12 Drawers x2
Attach panels [12] and [13] to front panels [10] and [11] using
4x small locking nuts (P). Tighten with a screwdriver.
Slide panel [14] along the grooves between the side panels [12]
and [13] to form the base of the drawer.
3
12
3
12
3
13
3
14
3
13
P
P
P
P
3
10 3
11 3
10 3
11

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawers x2 14 Drawers x2
Attach panels [12], [13] and [15] as shown using 4x screws (R).
Tighten with a screwdriver.
Attach slide rails (I) and slide rails (H) to the underside of panels
[12] and [13] as shown. Secure with 4x screws (E) and tighten with
a screwdriver.
RR
E
E
E
E
H
I
R
R
3
12
3
12
3
15
3
13
3
13
3
10 3
11

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 Drawers x2 16
Insert the completed drawers into the main unit as shown, ensuring they
slide easily along the rails.
Attach handle (M) to panels [10] and [11] with 2x screws (E).Tighten
with a screwdriver.
E
ME
3
10
3
10
3
11
3
11

Jack Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and
1x screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
Attach 8x wedges (K) to the corners of the back panels [6] as shown,
and secure with 8x screws (L). Attach 1x safety strap (V) to the
top panel [1] of the back side of the unit as shown using 1x washer (Z)
and 1x screw (W). Tighten with a screwdriver.
K
L
V
Z
W
V
Z
W
X
Y
Z
V
wall
plug
screw
strap
washer
6
6