Mocka Sintra Entertainment Unit User manual

Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
hinge
x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
Hardware Supplied
P Q
bolt
x17 x8
A B C D EFGHK
LMN
I
O S T
dowel
x21
screw
x19
slide
rail x1
slide
rail x1
slide
rail x1
slide
rail x1
R
screw
x24
locking
nut x17
screw
x14
J
wedge screw
bolt
x24
long
bolt
x12 x8
x3
bracket
x6
bracket
x1
Allen
key
cover
x3
seal
x3
plastic
glide
U V
x4
adjuster
x2

Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel Layout
Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Attach
2x brackets (M) to panel [1] and secure with 4x screws (E). Tighten with
a screwdriver. Place 2x covers (N) over the brackets (M) as shown.
1
1
1
3
4
5
5
6
7
9
2
8
10
11
40 x4
41 x2
C
C
C
C
C
C
C
C
EE
N
MM
The round head
is aligned with the
direction of the arrow.
E
EE
E
M
M
30
31
32
33
35
34

Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2 3
E
E
E
E
T
E
E
S
C
C
C
C
S
CL
E
T
E
A
A
A
D
D
D
D
A
7
6
7
6
8
Attach 1x slide rail (S) and 1x slide rail (T) to panels [6] and
[7] as shown and secure with 6x screws (E). Tighten with a
screwdriver. Insert 4x bolts (C) into panels [6] and [7]. Tighten
with a screwdriver.
Attach panels [7] and panel [6] to panel [8] with 4x dowels (A) and secure with
4x locking nuts (D). Tighten with a screwdriver.
CR

Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
D
A
A
A
A
D
D
D
D
D
A
A
A
A
A
D
6
1
3
3
7
4
4
5
5
9
Attach panels [3], [4], [6] and panel [7] to panel [1] with 8x dowels (A)
and secure with 8x locking nuts (D). Tighten with a screwdriver.
Slide panels [5] and [9] down along the grooves between the panels [3], [4],
[6] and [7] to form the back of the unit as shown.
6
7

Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Attach panel [2] to the unit with 8x dowels (A) and secure with 8x screws (B).
Tighten with a screwdriver.
2
2
6
3
7
4
EE
M
EE
N
MM
The round head
is aligned with the
direction of the arrow.
A
A
A
A
A
B
B
B
B
B
B
B
B
B
Attach 1x bracket (M) to panel [2] and secure with 2x screws (E).
Tighten with a screwdriver. Place 1x cover (N) over the bracket (M)
as shown.

Sintra Entertainment Unit
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
89 Door x2
Assembly Instructions
10
11
Q
Q
40
40
40
40
41
41
40
40
front
back
F
F
L
H
H
F
I
I
G
G
F
F
F
F
F
F
G
G
G
G
G
P
RR
P
RR
P
RR
P
RR
E
O
E
O
2
P
RR
O
E
Attach 6x leg brackets (F) to legs [40] and [41] using 12x long bolts (H).
Tighten with an Allen key (I). Attach legs [40] and [41] to panel [2] using
24x bolt (G) as shown. Tighten with an Allen key (I). Attach 4x plastic
glide (L) to the ends of the legs [40] using a hammer as shown. Attach
2x adjuster (Q) to the ends of the legs [41] as shown.
L
L
L
L
Attach 4x hinges (P) to panels [10] and [11] using 8x screws (R)
and attach 2x seal (O) and secure with 2x screw (E). Tighten with
a screwdriver.

10
11
Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1110
R
R
R
P
P
P
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
35
C
C
C
E
O
CC
4
3
Secure panels [10] and [11] to panels [3] and [4] by attaching the
other end of the 4x hinges (P) with 16x screws (R). Tighten with a
screwdriver. If a cover (N) is not catching on the seal (O), adjust the
magnetic end by twisting it outwards.
N
Insert 5x bolts (C) into panel [35]. Attach 1x seal (O) to panel [35]
and secure with 1x screw (E). Tighten with a screwdriver.

Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1312
30
30
31
31
32
BB
B
B
BB
34
33
Attach panels [30], [31] and [34] to panel [32] secure with 6x
screws (B). Tighten with a screwdriver.
Slide panel [33] down along the grooves between the side panels [30] and [31].

Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1514
30
31
35
DD
D
D
A
D
30
31
E
E
U
V
E
E
34
Attach slide rail (U) and slide rail (V) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
Attach panel [35] to panels [30], [31] and [34] with 1x dowel (A) and
secure with 5x locking nuts (D). Tighten with a screwdriver.

Sintra Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
1716
V
Z
W
V
Z
W
V
Z
W
K
K
K
K
K
K
K
K
K
J
J
J
J
J
J
J
J
J
N
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails. If the door
is not catching or sitting flush, twist the end of the cover (N) until it
catches on the seal (O).
Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (K). Tighten with a screwdriver. Attach 2x safety straps
(V) to the top of the back side of the unit as shown using 2x washers (Z)
and 2x screws (W). Tighten with a screwdriver.