Mocka Toby Desk User manual

Toby Desk
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
nut & bolt
combo x16
D
40mm screw
x10
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
C
screw
x6
E
feet
x4
F
wall strap
x2
G
wall plug
x2
B1
25mm screw
x10
B2
12mm screw
x3
Wall Strap

12
Toby Desk
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x feet (E) into the ends of leg panels [9] and [10]. Attach panels [9], [10], [11], [12] and [13] together and secure with 6 x
25mm screws (B1). Tighten with a screwdriver.
E
B1
B1
B1
B1
B1
E
E
E
9 10
9 10
11
12
13
B1

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach cross bar [14] to panels [12] and [13] and secure with 3 x 12mm
screws (B2).Tighten with a screwdriver.
12
1
11
Insert 2 x bolts (A) into panel [1] and attach panel [1] to panels [9] and
[10] and secure with 4 x 25mm screws (B1). Secure panel [11] to panel
[1] with 2 x screws (C). Attach 2 x wall straps (F) to the underside of
panel [12] and secure with 2 x screws (C). Tighten with a screwdriver.
Toby Desk
4
B2
B2 B1
B1
CC
C
C
B1
B1
B2 12
13
14 14
FFF
A
A
C

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Toby Desk
6
Insert 5 x bolts (A) into panel [2] and 4 x bolts (A) into panel [3]. Tighten
with a screwdriver. Attach panel [2] to panels [5], [6] and [7] and secure
with 5 x bolts (A). Attach panel [3] to panels [5] and [8] and secure with
4 x bolts (A). Tighten with a screwdriver. Attach panel [5] to panel [4]
with 2 x 40mm screws (D). Tighten with a screwdriver.
Insert 5 x bolts (A) into both sides of panel [4] as shown. Tighten with a
screwdriver. Attach panels [6], [7] and [8] to panel [4] and secure with
5 x nuts (A). Tighten with a screwdriver.
6
6
7
6
7
4
4
4
A
A
A
7
A
A
AA
DD
A
8
2
A
A
A
A
A
A
A
A
A
A
Flip
3
5
8
A
2
A A
A
A
A
3

Attach the assembled panels to panel 1 and secure with 8 x 40mm
screws (D) and 2x nuts (A). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole in the wall lining up with the top of the safety strap
(F). Fasten to the wall using 2x wall plug (G) and 2x screws (C). Ensure
unit is balanced and steady before use. You're done, enjoy!
78
Toby Desk
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
1
D
DD D
D
D
D
D
FG
C
A
A