Mocka Kirra User manual

Kirra Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
dowel
x16
bolt
x12
screw
x24
locking nut
x12
small screw
x40
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
A B CD E
NML
K
J
I
HG
F
wedge
x8
scerw
x8
long scerw
x4
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
screw
x16
O
small bolt
x20
small locking
nut
x20
slide rail
x4
slide rail
x4
slide rail
x4
slide rail
x4

Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 4x slide rails (F) to panel [2] and secure with 12x small screws (E).
Attach 4x slide rails (G) to panel [3] and secure with 12x small screws (E).
Insert 8x bolts (C) into panels [2] and [3].Tighten with a screwdriver.
33
2
Attach panels [5] and [6] to panel [3] with 2x dowel (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
E
G
CR
E
F
CL
5
6
6
E
E
EE
E
EE
E
EE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
G
G
G
F
F
F
F
C
C
CC
C
C
CC
A
A
D
D
D
D
D

Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Slide panel [7] down along the grooves of the side panels to form the back
of the unit.
3
2
2
Attach panel [2] to panels [5] and [6] with 2x dowel (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
5
6
6
7
A
D
A
D
D

Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
6
3
2
5
4
4
8
8
8
8
Attach panel [4] to the rest of the unit using 4x dowels (A).
Secure with 4x screws (M) and tighten with a screwdriver.
Attach the legs [8] to panel [4] as shown using 16x screw (J) .Tighten
with a screwdriver.
A
M
M
A
M
M
A
JJ
J
JJ
JJ
J

Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
3
2
Slide panel [7] down along the grooves between the panels [2] and [3]. Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver.
C
C
C
C
7
1

Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910 Drawers x4
Attach panel [1] to panels [2] and [3] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
Insert 5x small bolts (N) into panel [9].Tighten with a screwdriver.
AD
D
A
NN
N
NN
1
9
2
3
A
D

Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
12 Drawers x411 Drawers x4
10
10
11
11
12
13
Attach panels [10], [11] and [12] to panel [9] with 1x dowel (A) and secure
with 5x small locking nuts (O). Tighten with a screwdriver.
Slide panel [13] down along the grooves of panels [10] and [11].
A
O
O
O
O
O
9

10
10
14
11
11
Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawers x4 14 Drawers x4
Attach panel [10], [11], [12] and [14] as shown using 6x screws (B).
Tighten with a screwdriver.
Attach slide rails (I) and slide rails (H) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
B
B
BB
BB
E
H
E
E
E
I

Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Attach 8x wedges (K) into the corners of the back of the unit and secure
with 8x screws (L). Tighten with a screwdriver.Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
K
L
V
Z
W
K
L
V
Z
W

Kirra Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is
balanced and steady before use.
You’re done, enjoy!
X
Y
Z
V
wall
plug
screw
strap
washer