Mocka Hatcher Desk User manual

Hatcher Desk
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
bolt and nut
set x12
F
12mm
screw x19
G
hook
x2
H
holder
x1
I
organiser
top x1
J
feet
x4
B
12mm
screw x3
Phillips and Flathead screwdrivers required.
Hardware Supplied
For quicker assembly, we recommend the use of a power drill on a low-speed setting.
C
30mm
screw x10
D
50mm
screw x4
E
50mm
screw x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those supplied.
K L M
wall plug
x2
25mm
screw x2
safety
strap x2

12
Hatcher Desk
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 4 x feet (J) to panels [7] and [8]. Attach panels [3] and [4] to panels [7] and [8] and secure with 4 x 30mm
screws (C). Tighten with a screwdriver.
7 8
7
8
3
4
J
J
J
J
C
C
C
C

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [6] to panels [7] and [8] and secure with 4 x 50mm screws
(E). Tighten with a screwdriver.
Attach panel [1] to panels [7] and [8] and secure with 6 x 30mm screws
(C) and 4 x 50mm screws (D). Tighten with a screwdriver.
Hatcher Desk
4
E
E
E
E
6
7
8
78
C
C
CC
CCDD
D
D
1

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Hatcher Desk
6
Attach panel [2] to panels [3], [5] and [4] and secure with 6 x bolts (A)
and 6 x locking nuts (A). Tighten with a screwdriver.
Attach panels [3], [5] and [4] to panel [1] and secure with 6 x bolts (A)
and 6 x locking nuts (A). Tighten with a screwdriver.
AAA
A
AAA
AA
A
A
AA
2
2
3
3
5
5
4
4
1
A

7
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Hatcher Desk
8
Attach panel [9] to back of assembled frame as shown and secure with
13 x 12mm screws (F). Install the safety straps as the picture.Tighten
with a screwdriver.
Insert 1 x organiser (I) into panel [1] as shown. Attach 1 x holder (H)
into panel [1] and secure with 2 x 12mm screws (F) and 1 x 12mm
screw (B). Tighten with a screwdriver.
F
F
F
FF
F
F
F
F
FF
F
F
I
H
B
F
1
9
MMMM
MM

9
6
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Hatcher Desk
10
Attach 2 x hooks (G) to panel [1] and secure with 4 x 12mm screws (F)
and 2 x 12mm screws (B). Tighten with a screwdriver.
F
B
G
1
Move the unit into the desired location up against a wall, do not
drag. Use a drill to create a small hole lining up with the top of the
2 x safety straps (M) and secure with 2 x wall plugs (L), and 2 x
screws (K). Tighten with a screwdriver. You’re done, enjoy!
K
L
M