Mocka Sintra Side Table User manual

Sintra Side Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Hardware Supplied
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips screwdrivers and hammer required
bolt
x5
A B CD
dowel
x5
locking
nut x5
plastic
glide x3
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
E
x 5
sticker

Sintra Side Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel layout
C
C
C
3
2
1
1
1
Insert 3x bolts (C) into panel [1]. Tighten with a screwdriver.

Sintra Side Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
23
C
C
A
D
DA
D
2
2
3
Insert 2x bolts (C) into panel [2]. Tighten with a screwdriver. Attach panel [3] to panel [2] with 2x dowels (A) and secure with 2x locking
nuts (D). Tighten with a screwdriver.

Sintra Side Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
A
DD
A
A
B
B
E
B
B
2
2
33
1
1
Attach panels [2] and [3] to panel [1] with 3x dowels (A) and secure
with 3x locking nuts (D). Tighten with a screwdriver. Attach 3x plastic
glides (B) to the panels [2] and [3] using a hammer as shown.
Attach 5x stickers (E) to panels [2] and [3]. You’re done, enjoy!
E
E
E