Mocka Tahoe User manual

A B C D E
FH I JG
Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
dowel
x16
bolt
x18
locking
nut x18
small
screw x16
long
screw x8
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Tahoe Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
x14
long screw
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
L + R
slide rail
x4
L + R
slide rail
x4
mocka.co.nz | mocka.com.au
2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
40
nut
x8
long
screw x8
long
screw x5
K

2
12
Tahoe Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
Drawer x 2
5
5
5
1
A
A
A
A
YW
Insert 4 x locking nuts (B) into panel [1] .Attach 2 x bolts (A) into panel [1].
Attach 4 x dowels(C) to panel [1] and secure with [5]. Attach 1 x wall strap
(W) to panel [1] using 1x screw (Y). Tighten with a screwdriver.
A
A
B
BC
C
B
B
C
C
Insert 8 x bolts (A) into panels [5]. Tighten with a screwdriver.

3
34
Tahoe Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
4
3
G
G
E
E
E
E
66
GG
E
E E
E
Attach 1 x left slide rail (G) and 1 x right slide rail (G) to panels [6] and secure
with 4 x small screws (E).
Tighten with a screwdriver.
Attach 1 x left slide rail (G) to panel [3] and secure with 2 x small screws (E).
Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screws (E).
G
GG
G

4
56
Tahoe Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
1
6
3
4
B
C
C
C
C
C
C
B
B
B
B
B
Insert 6 x dowels (C) into panel [1]. Attach panel [1] to panels [3], [4] and [6]
and secure with 6 x locking nuts (B). Tighten with a screwdriver.
1
6
3
4
7
Slide panel [7] between the grooves on panels [3] and [4] to form the
back of the unit as shown. Tighten with a screwdriver.

5
78
Tahoe Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
J
J
J
J
J
J
J
I
I
I
I
J
I
I
I
8
8
9
9
10
with 8 x long bolts (J). Tighten with a screwdriver.
Insert 8 x nuts (I) into panels [8] and [10] . Attach panels [9] to panels [8] and
[10] and secure
17
KK
K
K
K
C
C
C
C
C
C
2
4
6
3
Tighten with a screwdriver.
Insert 6 x dowels (C) into panel [2]. Attach panels [2] to panel [3], [4] and
[6] and secure with 6 x long screws (D).
Attach panels [17] to panel [2] and secure with 5 x long screws (K).
D
D
D
D
D
D

6
910
Tahoe Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
11
12
13
14
14
13
BB
BB
AA
AAB
B
B
B
AA
AA
Tighten with a screwdriver.
Insert 8 x bolts (A) into panels [11] and [12]. Attach panels [13] and [14] to panels
[11] and [12], secure with 8 xlocking nuts (B).
Tighten with a screwdriver.
Attach panels [8] to panel [2] and secure with 8 x long screws (D).
D
2
8
8
D
D
D
D
D
D
D

7
11 12
Tahoe Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
F
11
12
13
14
14
13
15
15
15
15
13
13
16
16
14
14
F
FF
F
F
FF
Tighten with a screwdriver.
Slide panels [15] between the grooves on panels [13] and [14] to form the
base of the drawer as shown. Tighten with a screwdriver.
Attach panel [16] to panels [13] and[14], secure with 8 x medium screws (F).

8
13 14
Tahoe Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
13
14
E
E
H
11
12
13
14
H
E
E
H
H
E
E
Tighten with a screwdriver.
Attach 4 x slide rails (H) to panels [13] and [14] and secure with 8 x small
screw (E).
11
12
W
X
Z
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the 1 x safety strap (W).
Fasten to the wall using 1 x wall anchor (X),1 x washer (Z) and 1x long
screw. Ensure the unit is balanced and steady before use. You’re done,
enjoy!