Mocka Kai User manual

A B C D E
Hardware Supplied
short
screw x4
spring
washer x12
long
screw x8
flat
washer x12
spanner
x1
Before assembling, place all wooden furniture parts on a clean and
at surface to prevent scratches.
Do not fully tighten the nuts or nut bolts until all are in place.
To prevent thread damage, ensure that the nuts or nut bolts are not
over-tightened.
Keep hardware out of reach of children.
Kai Dining Table
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Carefully turn the table top [1] upside down and attach the legs [2] as
shown. Use 8x flat washers (D), 8x spring washers (C) and 8x long screws
(A) to secure the outer ends. Use 4x flat washers (D), 4x spring washers (C)
and 4x short screws (A) for the inner holes. Tighten with the spanner (E).
Carefully turn the table onto its legs, ensuring it is balanced and steady
before use. You’re done, enjoy!
2
1
B
C
D
EA
E
C
D
2
Kai Dining Table
2
mocka.co.nz | mocka.com.au
Assembly Instructions