Mocka Zara Coffee Table User manual

Zara Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
Hardware Supplied
bolt
x14
A B C D EFGH
JKLMN
I
O P Q
dowel
x20
screw
x22
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x14
screw
x6
bolt
x16
x2
bracket
x4
bracket
x1
Allen
key
cover
x2
seal
x2
felt
pad
x4
screw
x16

Zara Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12x2
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Attach 1x slide rails (F) to panels [3] as shown and secure
with 2x screws (E). Tighten with a screwdriver.
.
1
F
CL
E
3
C
C
C
C
C
C
F
E
E

Zara Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach 1x slide rail (G) to the side of panel [4] and secure with 2x
small screws (E). Flip panel [4] over, attach 1x slide rail (G) and
secure with 2x small screws (E). And tighten with a screwdriver.
Attach panels [3] and [4] panel [12] with 4x dowels (A) as shown.
G
CR
E
3
4
4
4
12
G
G
E
EA
A
A
A
E
E
FLIP

Zara Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panels [3] and [4] panel [12] with 4x dowels (A) as shown. Attach 2x brackets (M) to panel [2] and secure with 4x screws (E).
Tighten with a screwdriver. Place 2x covers (N) over the brackets (M)
as shown.
EE
N
MM
The round head
is aligned with the
direction of the arrow.
3
3
4
12
2
EE
EE
M
A
A
A
A

Zara Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panel [2] to the unit with 6x dowels (A) and secure with 6x
screws (B). Tighten with a screwdriver.
Attach 4x leg brackets (P) to legs [6] using 8x screws (J). Tighten with
a screwdriver. Attach legs [6] to panel [2] using 16x bolts (Q). Tighten
with an Allen key (K). Attach 4x felt pads (L) to the ends of the legs [6].
3
3
2
4
Q
Q
Q
Q
J
Q
P
6
6
6
L
K
L
L
L
L
6
6
6
B
B
B
B
B
B
A
A
A
A
2