Mocka Dakota User manual

A B C D
Phillips screwdriver required
Hardware Supplied
12mm
screw x12
32mm
screw x6
40mm
screw x12
allen key
x1
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these
are used to prevent your product tipping. The fixing device provided
should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
x2
washer
Z
wall
cr ew x1
r/washer
screw
x1
Y
wall
anchor
x1
X
safety
strap x1
W
Wall Strap
V
Dakota Console Table
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach panels [2] and [3] to panel [1] as shown using 6x 40mm screws
(A) and tighten with the allen key (D).
Attach panel [1] to the rest of the unit using 6x 40mm screws (A) and
tighten with the allen key (D).
3
2
1
3
3
3
2
A
A
A
A
A
A
D
1
A
D
A
A
A
A
A
Dakota Console Table
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach panels [2] and [3] to panel [1] as shown using 6x 40mm screws
(A) and tighten with the allen key (D).
Attach panel [1] to the rest of the unit using 6x 40mm screws (A) and
tighten with the allen key (D).
3
2
1
3
3
3
2
A
A
A
A
A
A
D
1
A
D
A
A
A
A
A
34
Carefully lay the frame onto its side and attach panel [4] as shown
using 6x 32mm screws (C). Attach both panels [5] as shown using 12x
12mm screws (B). Tighten with a screwdriver.
C
C
B
B
C
B
B
C
B
B
B
B
B
B
B
B
5
5
4
5
4
Carefully lift unit onto its feet. Attach safety strap (V) to the underside
of the panel [4] using 1x washer (Z) and 1x screw (Y). Tighten with a
screwdriver. Once assembled lift furniture into place, do not drag.
Y
V
Z
Z
V
Y
Dakota Console Table
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
You’re done, enjoy!Use a drill to create a small hole lining up with the top of the safety strap
(V). Fasten to wall using 1x wall anchor (X), 1x washer (Z) and 1x screw
(W). Ensure unit is balanced and steady before use.
V
X
Z
W
wall
anchor
wall
screw
Washer
Strap
Dakota Console Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au