Mocka Urban Entertainment Unit User manual

A B1 B2 C1 C2 D
EFH I J
KL
G
M
Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
50mm
screw x12
30mm
screw x16
bolt &
nut x30
12mm
screw x24
18mm
screw x10
wedge
x10
feet
x4
25mm
screw x2
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
wall
anchor x2
cover
x2
wall
strap x2
14mm
screw x2
dowel
x20
WARNING: Any furniture that is not anchored to a wall has the potential to
tip over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those
supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
50mm
screw x14
slide
rail x4
N O P
bracket
x2
12mm
screw x2
stopper
x2
E1
E2
E4
E3
Urban Entertainment Unit
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach 4x feet (H) to the bottom of the table legs. Assemble the table legs as shown using 16x 30mm screws (B2) and
tighten with a screwdriver.
H
H
H
H
B2
B2
B2
B2
B2
B2
B2
B2
Urban Entertainment Unit
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

12
Attach 4x feet (H) to the bottom of the table legs. Assemble the table legs as shown using 16x 30mm screws (B2) and
tighten with a screwdriver.
H
H
H
H
B2
B2
B2
B2
B2
B2
B2
B2
B1
34
Attach panel [2] to the legs as shown using 12x 50mm screws (B1).
Tighten with a screwdriver.
Attach 2x bolts (A) to panel [4] and 2x bolts (A) to panel [5]. Attach 1x
slide rail (E1) to panel [4] and secure with 2x 12mm screws (C1). Attach
1x slide rail (E3) to panel [5] and secure with 2x 12mm screws (C1).
Tighten with a screwdriver.
5
4
B1
B1
B1
B1
B1
B1
B1
B1
B1 B1 B1
2
E1
B1
C1
C1
A
E3
E3
A
AA
A
Urban Entertainment Unit
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

A
56
Attach 1x slide rail (E3) to panel [6] and secure with 2x 12mm screws
(C1). Attach 1x slide rail (E1) to the other side of panel [6] and secure
with 2x 12mm screws (C1). Tighten with a screwdriver.
Attach 2x bolts (A) to panel [3]. Attach 2x brackets (N) to panel [3] using
8x 12mm screws (C1). Tighten with a screwdriver.
3
6
6
E3 E1
E1
E3
C1
C1 C1
C1
C1
C1
N
N
N
ip
A
Urban Entertainment Unit
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
A
56
Attach 1x slide rail (E3) to panel [6] and secure with 2x 12mm screws
(C1). Attach 1x slide rail (E1) to the other side of panel [6] and secure
with 2x 12mm screws (C1). Tighten with a screwdriver.
Attach 2x bolts (A) to panel [3]. Attach 2x brackets (N) to panel [3] using
8x 12mm screws (C1). Tighten with a screwdriver.
3
6
6
E3 E1
E1
E3
C1
C1 C1
C1
C1
C1
N
N
N
ip
A
78
Attach panels [4], [5] and [6] to panel [3] as shown using 6x locking nuts
(A) and 6x dowels (F). Tighten with a screwdriver. Attach 2x locking
nuts (A) to panel [3].
Attach panels [4], [5] and [6] to panel [2] using 6x dowels (F) and 6x
50mm screws (D). Tighten with a screwdriver.
4
46
6
3
5
5
A
F
F
F
F
F
3
D
F
DD
D
F
FF
F
F
2
A
A
A
A
A
A
A
Urban Entertainment Unit
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Attach panel [7] to panel [3] using 2x locking nuts (A) and 2x dowels
(F). Tighten with a screwdriver.
Insert 6x bolts (A) into panel [1].
7
3
F
F
A
1
A
A
A
A
A
A
A
Urban Entertainment Unit
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Attach panel [7] to panel [3] using 2x locking nuts (A) and 2x dowels
(F). Tighten with a screwdriver.
Insert 6x bolts (A) into panel [1].
7
3
F
F
A
1
A
A
A
A
A
A
A
11
12
Attach panels [11], [12] and [13] together using 4x 50mm screws (D).
Attach panel [14] to panel [13] with 2x bolt and nut sets (A). Slide panel
[15] between the side panels. Attach 1x stopper (P) to each panel [9]
and [10] using 2x 12mm screws (O). Tighten with a screwdriver.
D
O
D
D
D
10
9
13
12
11
14
15
P
A
A
F
F
F
F5
4
1
7
Slide panel [8] down along the grooves between panels [4] and [5] to
form the back of the unit. Attach panel [1] to panels [4], [5] and [7] using
6x dowels (F) and 6x locking nuts (A). Tighten with a screwdriver.
8
A
AA
A
A
AA
Urban Entertainment Unit
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14
Attach 10x wedges (G) to the back of the unit as shown, and secure
with 10x 18mm screws (C2). Tighten with a screwdriver.
8
GC2
G
G
G
GG
G
G
G
GG
Attach panel [9]/[10] to the panels [11], [12] and [14] using 6x bolts and
nut sets (A). Attach 1x slide rail (E2) to panel [11] using 2x 12mm screws
(C1). Attach 1x slide rail (E4) to panel [12] using 2x 12mm screws (C1).
Tighten with a screwdriver.
A
10
9
13
12
11
12
11
A
A
C1
C1
C1
C1
E2
E4
A
A
A
AA
Urban Entertainment Unit
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14
Attach 10x wedges (G) to the back of the unit as shown, and secure
with 10x 18mm screws (C2). Tighten with a screwdriver.
8
GC2
G
G
G
GG
G
G
G
GG
Attach panel [9]/[10] to the panels [11], [12] and [14] using 6x bolts and
nut sets (A). Attach 1x slide rail (E2) to panel [11] using 2x 12mm screws
(C1). Attach 1x slide rail (E4) to panel [12] using 2x 12mm screws (C1).
Tighten with a screwdriver.
A
10
9
13
12
11
12
11
A
A
C1
C1
C1
C1
E2
E4
A
A
A
AA
15 16
Move the unit into the desired location up against a wall. Attach 2x wall
straps (L) to the back sides of panel [1] and secure with 2x 14mm screws
(J). Fasten to wall using 2x wall anchors (K) and 2x wall screws (I).
Ensure unit is balanced and steady before use. You’re done, enjoy!
1
J
K
L
I
J
Safety Straps
Insert the drawers as shown, ensuring they slide smoothly and easily
along the rails. Slide on 2x covers (M) over the 2x brackets (N) as
shown. Once assembled, lift the furniture into place, do not drag. If the
drawer is not catching or sitting flush, twist the end of the cover (M) until
it catches on the stopper (P).
10
9
N
M
Urban Entertainment Unit
Assembly Instructions
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558