Mocka Under Cot Storage User manual

wheel
x2
ABC D
EFF
Hardware Supplied
dowel
x12
bolt
x16
locking
nut x16
screw
x16
Mocka Under Cot Storage
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au
wheel
x2
0
G
cover
x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

12
2
A
A
A
CC
B
1
2
B
A
C
CA
A
Attach the two side panels [2] to the base panel [1] with 6x bolts (A), 4x
dowels (C) and secure with 6x locking nuts (B). Tighten with a
screwdriver.
4
3
AC
A
A
A
A
C
C
C
CB
B
B
C
C
C
A
A
1
2
B
Mocka Under Cot Storage
Assembly Instructions
2
mocka.co.nz | mocka.com.au
Attach the front panel [4] and back panel [3] with 10x bolts (A), 8x dowels (C)
and secure with 10 x locking nuts (B). Tighten with a screwdriver. Cover
Locking nuts (B) with 4 x covers (G).
B
G
G
G
G

34
Mocka Under Cot Storage
Assembly Instructions
3
mocka.co.nz | mocka.com.au
Repeat steps 1 to 3 to complete the second box. You’re done, enjoy!
E
D
Attach 2x wheels (E) and 2x wheels (F) to the underside of panel [1] as
shown, using 16x screws (D). Tighten with a screwdriver.
E
D
D
F
D
F
1