Monoprice MP Mini Delta V2 User manual

1
MP Mini Delta V2 3D Printer
P/N 21666
Quick Start Guide
1. Unbox the printer. Refer to the PACKAGE CONTENTS section above and verify that
you received all parts and accessories.
2. Using a pair of scissors or wire cutters, remove the security straps from the printer's
Carriage. Lift the Carriage, then remove the protective carton shell.

2
3. Locate the two vertical slots on the side, then install the Filament Holder and place
the sample filament on the holder. Press down on the lever on the Filament
Extruder Gear, then feed filament into the hole until you encounter resistance.
Release the lever.
4. Plug in and power on the printer.
5. Select your desired menu language. The printer will then display the Wifi Setting
screen. Touch the NO button to continue. The full Wi-Fi setup and app installation is
covered in the POLOPRINT PRO WI-FI SETUP section in the full manual.

3
6. The printer will then display the Quick guide screen. Touch the Next option, then
follow the on-screen instructions to print your first model. Otherwise, touch the
Quit option to exit to the Main Menu.
Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
Wi-Fi® and Wi-Fi Alliance® are registered trademarks of Wi-Fi Alliance.