Motorola 6840420Z01-AD Instruction Manual

START HERE >
COMMENCEZ ICI >
HIER BEGINNEN >
INTRODUZIONE >
COMENZAR >
IHF1000,
Premium Speech-Operated
Car Kit with Bluetooth®
Wireless Technology

1
Welcome
Welcome to Motorola’s “connected” world of Bluetooth
®
personal area wireless networking. Motorola’s Premium
Speech-Operated Car Kit with Bluetooth Wireless Technology
makes wireless connection simple and quick.
Motorola’s Premium Speech-Operated Car Kit with Bluetooth
Wireless Technology offers these features:
• seamless, wireless handsfree audio through Bluetooth
connection
• digital audio interface with high quality, full-duplex,
handsfree speech
• Speaker Independent Speech Recognition in US
English, UK English, French, German, Italian and
Spanish
• voice-driven menu prompts
• entertainment mute—automatically mutes radio during
calls (where supported by the radio)
• noise reduction and acoustic echo cancellation
• compliance with Bluetooth Hands Free 0.96 and 1.0
profiles
• The IHF1000 car kit supports the Bluetooth
“Hands-Free” Profile. In order for your compatible
Bluetooth enabled phone to communicate with the
IHF1000 car kit, it must also support this profile.
However, even if your phone supports the Bluetooth
“Hands-Free” Profile, it may not be capable of taking
2
advantage of all the advanced features/functionality
and/or the functionality of such features of the IHF1000
car kit may be limited due to compatibility conflicts
between the phone and the IHF1000 car kit.
Note: Any information in brackets represents the UK
English version of this manual.

3
Contents
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety and General Information . . . . . . . . . . . . . . . . . . . . 5
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing the Handsfree Kit . . . . . . . . . . . . . . . . . . . . . . . 10
Guidelines for Installation and Connection . . . . . . . . . . . 10
How to Install the Handsfree Kit . . . . . . . . . . . . . . . . . . . 11
Using Your Car Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
User Interface Module (UIM) Control Buttons. . . . . . . . . 19
Connecting Your Phone to the Car Kit . . . . . . . . . . . . . . 23
Removing Your Phone from the Car Kit . . . . . . . . . . . . . 27
Placing a Call with the Car Kit . . . . . . . . . . . . . . . . . . . . 28
Answering a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using Features while on a Call . . . . . . . . . . . . . . . . . . . . 33
Managing the Contact List . . . . . . . . . . . . . . . . . . . . . . . 37
Turning Off System Prompts. . . . . . . . . . . . . . . . . . . . . . 39
Announcing a Caller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Selecting a Language. . . . . . . . . . . . . . . . . . . . . . . . . . . 41
If You Need Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Warranty Coverage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Calling Features Quick Reference . . . . . . . . . . . . . . . . . 44
Dial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4
Call Contact. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Phone Voice Tags [Phone Voice Name] . . . . . . . . . . . . 45
Call in Progress. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Contact List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
UIM Button Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 50
UIM LED Indicator Functions . . . . . . . . . . . . . . . . . . . . 52

5
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR PHONE.
Users are not permitted to make changes or modify the device in any
way. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. See 47 CFR Sec. 15.21
.
This device complies with part 15 of the FCC rules and with RSS-210
/ RSS-139 of the Industry Canada. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation. See 47 CFR Sec. 15.19(3).
Canada Compliance (Industry Canada)
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and away from windows to provide
maximum shielding. Equipment that is installed outdoors is subject to
licensing.
Electromagnetic Interference/Compatibility
Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility.
Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
6
Declaration of
Conformity
Hereby, Motorola declares that this product LV001/05/IHF1000/D is in
compliance with:
• The essential requirements and other relevant provisions
of Directive 1999/5/EC
• All other relevant EU Directives
You can view your product's Declaration of Conformity (DoC) to Directive
1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte

7
Getting Started
Getting Started
About This Guide
This guide describes the basic features of your IHF1000
car kit.
Advanced Feature
This icon identifies an advanced feature or
functionality that is dependent on the
compatibility of your mobile phone. Not all
Bluetooth
®
enabled mobile phones that support
the Bluetooth “Hands-Free” Profile will support
this feature or provide the functionality described.
8
Getting Started

9
Installing the Handsfree Kit
Installing the
Handsfree Kit
Guidelines for Installation and
Connection
• Only qualified personnel should install this car kit. If
necessary, contact the vehicle manufacturer for air
bag information specific to the vehicle.
Caution: An air bag inflates with great force. DO NOT
place objects, including communication equipment, in the
area over the air bag or in the air bag deployment area. If
the communication equipment is improperly installed and
the air bag inflates, serious injury could occur.
• Mount components securely on strong surfaces to
prevent shifting that could cause injury or interfere
with safe vehicle operation. Always use the supplied
mounting hardware
• Mounted components and attached wires or cables
must not interfere with seating or leg space.
• Route cables so they are protected from pinching,
sharp edges, and crushing. Keep all in-line
connectors easily accessible.
• This car kit is intended for use in 12 volt negative
ground systems only. The car kit draws less than 5
amps. Confirm that the vehicle’s electrical system can
supply this current.
10
Installing the Handsfree Kit
How to Install the Handsfree
Kit
Caution: This car kit must be connected to a 5A fuse in
the car fuse panel to prevent fire or other damages if a
short circuit should occur somewhere in the electronic
module. Before installing the car kit, disconnect the
vehicle’s battery.
Before you begin: Unpack, assemble, and test all
components on a service bench.
Car Kit Contents
Interface Cable
The Interface Cable connects the electronic module to the
other system components. It connects the vehicle’s power
and ignition to the car kit and provides some optional audio
connections when the car kit is used with the vehicle’s
radio.
Electronic Module
You can place the electronic module anywhere inside the
vehicle to facilitate convenient connection between the
interface cable and other system components.
Microphone
The microphone cable can be routed along the side of the
vehicle, through the dash, and along the edge of the
windshield. The microphone is placed best near the
rearview mirror and aimed directly toward the user.

11
Installing the Handsfree Kit
User Interface Module
The User Interface Module (UIM) cable can be mounted in
several ways to provide a safe and comfortable
environment for use.
Audio Connections
You can install the system’s audio components in one of
2 ways:
External Speaker
If you are installing the system with the external speaker,
you MUST leave the audio output (+/-) lines disconnected.
(See “Power Connections” on page 49.) The external
speaker should be connected to the interface cable.
Vehicle Radio
If you intend to connect the system to the vehicle radio to
control audio level and the radio supports it, you must
connect the audio output (+/-) lines to your vehicle’s
entertainment system.
Note: The system's handsfree audio has been optimized
for the external speaker. Routing the audio output through
the vehicle's entertainment system may alter the
handsfree audio performance.
Installing the Electronic Module
The best location for the electronic module is under the
vehicle’s dash. The box must be protected from dirt and
moisture and have adequate space for cooling and to allow
for cable connection.
12
Installing the Handsfree Kit
For optimal Bluetooth
®
performance, mount the electronic
module in a central location within the vehicle. Do not
place it behind or within large areas of metal.
The location of the electronic module MUST NOT interfere
with deployment of the vehicles air bags. Do NOT locate
the electronic module in the vehicle’s trunk (boot).
Installing the Interface Cable
Caution: Failure to follow the steps below may cause the
accessory not to work properly and may cause damage to
the car kit.
The interface cable has integral fuses on the power lines
(VBatt and Ign).
Note: When installing the system into vehicles without an
available adapter harness, remove the white 8-pin
connector.

13
Installing the Handsfree Kit
Note: See “Power Connections” on page 49 for more
information.
1 Connect the GREEN Ignition Sense wire to an
ignition-switched location on the fuse block. When the
ignition is off, the ignition sense line is low.
2 Connect the YELLOW Entertainment Mute Wire to the
vehicle’s entertainment system.
Note: This feature is only operational if the vehicle’s
radio supports this capability. Installation may require
an optional relay (not included). The mute line is an
active low signal.
Interface
Cable
Speaker*
Microphone
IHF1000
Module
IHF1000 System Diagram
User Interface Module
(UIM)
* If Supported in Vehicle
FUSE
Radio Mute (Yellow)
Line Audio + (Orange)
Line Audio - (Blue)
FUSE
VBATT (Red)
Ground (Black)
Ignition (Green)
Speaker + (Purple)
Speaker - (Gray)
To Adapter/
Vehicle*
14
Installing the Handsfree Kit
3 Connect the RED positive battery lead to a point in the
vehicle’s fuse box that is fused at 5 amp.
4 Connect the BLACK ground wire to the vehicle chassis.
5 Inspect all connections.
Note: The ORANGE and BLUE wires are not used.
(These wires are used to connect the line-level audio to
the vehicle radio, if the radio supports this feature.)
Note: The system's handsfree audio has been optimized
for the external speaker. Routing the audio output through
the vehicle's entertainment system may alter the
handsfree audio performance.
Installing the Microphone
Note: The microphone MUST BE positioned properly or
this product WILL NOT perform optimally.
1 Attach 1 side of the
VELCRO
®
tape to the
bottom side of the
microphone.
2 Securely mount the
microphone on the
overhead console or
headliner between the
driver and passenger.
DO
NOT mount on the visor or windshield.
Vibrations
will negatively impact audio and speech recognition
performance.
16in/40cm

15
Installing the Handsfree Kit
• Locate the microphone no more than 16 inches
(40 cm) from the driver's mouth and out of direct air
flow from vent or defrost.
• Aim the microphone directly toward the driver. The
front of the mic should point toward the driver. The
wire comes out the back of the mic.
• Do not allow anything (such as a rear-view mirror or
sun visor) to block the path between the microphone
and the driver.
• Mount the microphone firmly so that vibrations do not
affect audio quality.
Caution: The location of the microphone MUST NOT
interfere with the vehicle’s air bag deployment.
3 Connect the microphone to the interface cable.
Installing the External Speaker
Note: Always use the supplied
mounting hardware.
1 Securely mount the speaker in
the passenger footwell, either
to the transmission hump
(center console) or beneath
the dash. Position the speaker so that it does not
directly face the microphone and does not interfere
with either the passenger or automobile seat.
Caution: The location of the external speaker MUST NOT
interfere with the vehicle’s air bag deployment.
2 Connect the speaker to the electronic module.
16
Installing the Handsfree Kit
Installing the User Interface Module
1 Remove the backing of the
tape on the bottom of the
User Interface Module (UIM).
2 Select a suitable location on
the vehicle dash, within easy
reach of the driver, and mount the UIM. The UIM can
be mounted anywhere on the dash.
Caution: The location of the UIM MUST NOT interfere
with the vehicle’s air bag deployment.
Caution: The mounted UIM MUST NOT create a visual
distraction.
Caution: DO NOT mount the UIM on the steering wheel.
3 Connect the UIM to the interface cable.

17
Installing the Handsfree Kit
18
Using Your Car Kit
Using Your Car Kit
User Interface Module (UIM)
Control Buttons
The UIM enables you to set up and use the Bluetooth
®
Hands Free Car Kit.
The buttons on the UIM are lit at different times to indicate
different system states and when they may be pressed.
Note: See “UIM LED Indicator Functions” on page 52 for
information on when and why the buttons light or flash.
The TALK Button
The blue TALK button has 2 functions, depending on
whether you press and release it quickly or press and
hold it.
Press and Release
Press and release the TALK button to initiate a Speech
recognition (SR) session. When you begin a SR session,
you hear a prompt and then a short beep. The beep—also
ANSWER
END
TALK
Volume
UP/DOWN

19
Using Your Car Kit
known as a listening prompt—indicates that the system is
waiting for a verbal command from you.
Note: If a Press and Release of the TALK button is done
during an SR prompt, the prompt will be stopped and the
system will go to the listening prompt.
Press and Hold
Press and hold the TALK button to initiate the pairing
process.
The ANSWER Button
The green ANSWER button has 6 functions, depending on
the state of the system. These functions can be initiated by
pressing and releasing or pressing and holding the button.
20
Using Your Car Kit
Press and Release
Press and Hold
During an active call, press and hold the ANSWER button
to switch the audio between handsfree and privacy modes.
The END Button
The red END button has 5 functions. These functions can
be initiated by pressing and releasing or pressing and
holding the button.
In This Situation ... Press and Release
ANSWER to ...
when receiving an
incoming call
answer the call
when system not on a
call
attempt to place call using
last number dialed
while 1 call in progress toggle between Hold &
Resume
while in a call & after call
waiting notification is
received
answer the waiting call
with 2 active calls toggle between calls

21
Using Your Car Kit
Press and Release
Press and Hold
Volume UP/DOWN Buttons
During normal operation, press and release the Volume
UP/DOWN buttons to increase or decrease speaker
volume.
(If the system is using the vehicle radio speakers, you can
also use the radio’s volume controls to raise or lower
volume.)
To mute the microphone, press and hold either Volume
UP/DOWN button. To unmute the microphone, press and
release either button.
In This Situation ... Press and Release END to ...
during an active call end the call
when system is awaiting
a command during
Speech recognition mode
cancel Speech recognition
mode
when receiving an
incoming call
reject the call
In This Situation ... Press and Hold END to ...
during an active call
(including multi-party
calls)
end all calls
when system not on a
call terminate the Bluetooth
®
connection
22
Using Your Car Kit
Getting Help
While learning to use the system, or whenever you need a
reminder, say “
Help .” The system includes Help prompts in
every menu.
You can also say “
Repeat ” whenever you are prompted for
a
Yes or No . The system will repeat the question.
Note: If you need to reset the system, press and hold the
TALK and ANSWER buttons simultaneously for more than
2 seconds.
Connecting Your Phone to the
Car Kit
Before you can use this car kit, you must complete a
Bluetooth
®
connection between the kit and your phone.
You establish a Bluetooth connection between your car kit
and phone with a paired link.
When you set up a paired link, the car kit remembers the
phone’s ID. Once the car kit and phone are paired, your
car kit automatically connects to your phone every time
you start your vehicle or power up the car kit.
This system supports paired links with up to 4 phones.
Note: The process of initiating a Bluetooth connection with
a phone varies per phone manufacturer. For more
information, refer to the user’s guide for your phone.

23
Using Your Car Kit
Initial Pairing
Note: Use this procedure ONLY if there are no handsets
paired to the system.
With the car kit and phone in close proximity:
Action
1
Press the TALK button.
2 When prompted, say “ Pair Phone .”
The system responds:
Set your phone in scan mode and
enter 1234 when prompted for the passcode
.
3 When the phone displays the device name, select
the device.
The phone displays the passcode entry screen.
4 Enter the passkey ( 1234 ).
The phone displays “PIN verified,” and the system
says:
Pairing complete. Connection in progress.
Note: Some phones ask you to accept the BT link.
Enter Yes.
Upon successful completion, the system says:
Connection is complete. Phone <n> ready for use .
24
Using Your Car Kit
Additional Pairing
To pair additional handsets to the system, with the car kit
and phones in close proximity:
Action
1
Press the TALK button.
2 When prompted, say “ Setup Menu .”
The system responds:
Setup menu. Please say a command .
3 Say “ Pair Phone .”
The system responds:
Set your phone in scan mode and enter
1234 when prompted for the passcode
.
4 When the phone displays the device name, select
the device.
The phone displays the passcode entry screen.
5 Enter the passkey value provided by the system.
The phone confirms that the PIN is verified and says:
Pairing complete. Connection in progress .
Note: Some phones ask you to accept the BT link.
Enter Yes.
Upon successful completion, the system says:
Connection is complete. Phone <n> ready for use .

25
Using Your Car Kit
Selecting a Phone
With the car kit and phone in close proximity:
List Phones Paired to the System
Action
1
Press the TALK button.
2 When prompted, say “ Setup Menu .”
The system responds:
Setup menu. Please say a command .
3 Say “ Connect Phone <n> . ”
The system responds:
Connecting phone <n> .
Upon successful completion, the system says:
Connection complete .
Action
1
Press the TALK button.
2 When prompted, say “ Setup Menu .”
The system responds:
Setup menu. Please say a command .
3 Say “ List Phones. ”
The system says:
The following phones are paired: phone 1,
etc.
26
Using Your Car Kit
Removing Your Phone from the
Car Kit
Removing a Connected Phone
Removing All Phones
Action
1
Press the TALK button.
2 When prompted, say “ Setup Menu .”
The system responds:
Setup menu. Please say a command .
3 Say “ Remove phone < n>. ”
The system responds:
Removing phone <n>. Are you sure? .
4 Say “ Yes.
The system responds: Phone <n > removed .”
Action
1
Press the TALK button.
2 When prompted, say “ Setup Menu .”
The system responds:
Setup menu. Please say a command .
3 Say “ Remove all phones .”
The system responds:
Are you sure you want to remove all
the phones?
.
4 Say “ Yes. ”
The system responds:
All phones removed [All phones have
been removed]
.

27
Using Your Car Kit
Placing a Call with the Car Kit
To place a call, you must first establish a Bluetooth
®
link
between the car kit and your phone (see page 22).
You can place a call with the car kit in these ways:
• Dial a number from the phone.
• Digit dial with Speech recognition.
• Use the system’s Contact List.
• Speak a phone voice tag [phone voice name].
• Use the Speed Dial command.
• Use the Redial command.
• Use last number redial from the User Interface
Module.
When connected, all of these calls are handsfree. You can
terminate a SR session at any time by pressing the END
button.
Placing a Call with Speech recognition
You can enter a phone number as 1 or more segments of
digits. A segment can include up to 15 digits. An entire
number can include no more than 32 digits. You can begin
the number set with the * or # character.
Note: Speak numbers as continuous digits. For example,
dictate 555-2211 as “
5-5-5-2-2-1-1 ”, not
“
5-5-5-twenty-two-eleven .”
28
Using Your Car Kit
Calling with a Whole Number
Calling with Digit Segments
Action
1
Press the TALK button.
2 When prompted, say “ Dial Number .”
The system responds:
Number please? .
3 Dictate the phone number as a single set of digits
(without pauses between digits).
The system recites the digits heard.
4 If the number recited by the system is correct, say
“
Dial. ” The system responds: Dialing .
Action
1
Press the TALK button.
2 When prompted, say “ Dial Number. ”
The system responds:
Number please? .
3 Dictate the first segment of digits. (For example, say
the 1st 3 numbers.)
The system recites the digits heard.
4 Dictate the next segment of digits. The system
recites the digits heard.
Repeat this step until you enter the complete phone
number.
5 When the complete number is recited by the system,
say “
Dial. ” The system responds: Dialing .

29
Using Your Car Kit
To delete a phone number segment, say “ Clear ” when
prompted for the next segment. The system responds
Last String Cleared [Last Entry Cleared], echoes any
remaining segments, and waits for you to dictate a
new segment.
To clear all phone number segments dictated so far, say
“
Clear All ” when prompted for the next segment. The
system clears all segments and returns to the
Number please?
prompt (see step 2 above).
Dialing a Number from the Contact List
Dialing a Number Using the Phone’s Voice
Tags [Phone Voice Name]
Action
1
Press the TALK button.
2 When prompted, say “ Call <contact> .”
Note: The contact must be a valid contact stored in
the Contact List.
The system responds:
Do you want to call <contact>? .
3 If the number recited by the system is correct, say
“
Yes. ” The system responds: Calling .
Action
1
Press the TALK button.
30
Using Your Car Kit
Using the Speed Dial Command
Note: Speak speed dial numbers as continuous digits. For
example, dictate speed dial location 22 as “
2-2 ”, not
“
twenty-two .”
2 When prompted, say “ Phone voice tag [Phone
Voice Name
].”
Note: The voice tag must already be stored in the
phone.
The system responds:
Phone voice tag please,[Phone voice
name, please
. ]
3 Say “ <voice tag> ” (where <voice tag> is a voice tag
stored in the phone).
The system calls the number associated with the
phone voice tag [phone voice name].
Action
1
Press the TALK button.
2 When prompted, say “ Speed Dial. ”
The system responds:
Speed dial number, please.
3 Recite the speed dial number.
The system repeats the number it heard and asks:
Is this correct?
4 If the number recited is correct, say “ Yes. ”
The system responds:
Dialing , and places the call.
Action

31
Using Your Car Kit
Using the Redial Command
You can also redial the last number by pressing the
ANSWER button.
Answering a Call
When you receive an incoming call, the system responds:
Call from <Caller ID> , if available.
If Caller ID is not available:
• The system plays the in-band ring tone , if the
phone supports it.
• If no in-band ring tone is supported, the system
generates a local ring tone .
To answer an incoming call:
Action
1
Press the TALK button.
2 When prompted, say “ Redial ”.
The system responds:
Redialing.
Action
Press the ANSWER button.
or
Press your phone’s Send, OK, Answer, or Yes key
(depending on your phone model), just as you would to
answer a call in privacy mode.
32
Using Your Car Kit
Ending a Call
Using the Phone
Using the UIM
Using the End Call Command
Using Features while on a Call
Note: To use the functions described below:
• A Bluetooth
®
link must be established between the
car kit and your phone.
• A call must be initiating or in progress.
Action
Press your phone’s End or Hang up key (depending on
your phone model).
Action
Press the END button.
Action
1
Press the TALK button.
2 When prompted, say “ Hang Up .” The system
responds:
Call ended.

33
Using Your Car Kit
Rejecting a Call
To reject a call while the phone is ringing:
Transferring a Call
From the Car Kit to Your Phone
Action
Press the END button on the UIM. The system
responds:
Call rejected .
or
Press your phone’s IGNORE key (may be a soft key,
depending on phone model) or your phone’s End or
Hang up key. The system responds:
Call ended .
Action
Press and hold the ANSWER button.
or
Turn OFF the vehicle ignition. (If your phone asks to
switch to handset mode, press Yes.)
or
Press the TALK button. When prompted, say “ Privacy
Mode
.”
34
Using Your Car Kit
From Your Phone to the Car Kit
Muting and Unmuting a Call
Using the UIM
Using the MUTE and UNMUTE Commands
Action
Press and hold the ANSWER button.
or
Turn ON the vehicle ignition.
or
Press the TALK button. When prompted, say “ Hands
Free mode
.”
Action
To mute the microphone during a call, press and hold
either Volume UP/DOWN button.
To unmute the microphone, press and release either
Volume UP/DOWN button.
Action
To mute the microphone during a call, press the TALK
button. When prompted, say “
Mute .”
To unmute the microphone, press the TALK button.
When prompted, say “
Unmute .”

35
Using Your Car Kit
Call Waiting
When you are on a call, an audible beep signals a 2nd call.
Note: If the ANSWER button is not pressed, the incoming
call is automatically rejected and sent to voicemail (if set
up on the phone).
Sending DTMF Tones
You can send DTMF tones from the phone keypad, or by
using the
Enter command:
Action
Press and release the ANSWER button to place the 1st
call on hold and answer the incoming call.
Each time you press and release the ANSWER button,
you toggle between active calls.
Action
1
Press the TALK button.
2 When prompted, say “ Enter <digits> ” to send
numbers as DTMF tones.
36
Using Your Car Kit
Managing the Contact List
You can store a list of names and phone numbers in your
car kit’s contact list. The list can include up to 20 entries.
Adding an Entry
Action
1
Press the TALK button.
2 When prompted, say “ Contact List .”
3 If the system responds: Contact list is empty. Do you wish to
add a contact?
, say “ Yes .”
or
If the system responds: Contact list. Please say a command ,
say “
Add Contact. ”
4 When the system responds: Please say the name , recite
the contact to be stored.
If an error is detected, the system asks you to try
again.
If it accepts the name, the system responds:
Please say
the number for
<c ontact > .
5 Dictate the phone number as an entire number
(without pauses between digits).
or
Dictate the number as a series of segments (for
example, say the 1st 3 digits, then the next 3, etc.),
until you have dictated the entire number.
The system repeats the number it heard.

37
Using Your Car Kit
Deleting an Entry
6 When you have correctly entered the entire phone
number, say “
Store .”
The system responds:
Contact added. Would you like to add
another contact?
7 Say “ No ” to return to the system’s ready state.
or
Say “ Yes ” to add another entry.
Action
1
Press the TALK button.
2 When prompted, say “ Contact List .”
3 If the system responds: Contact list. Please say a command ,
say “
Delete <c ontact > ” (where <c ontact > is the name
of a contact entry).
or
If the system responds: Contact list is empty. Do you wish to
add a contact?
, say “ No .” The system exits to ready
state.
4 When the system responds: Are you sure you want to
delete the contact
<c ontact > ? , say “ Yes. ”
The system responds:
Contact deleted .
Action
38
Using Your Car Kit
Listing Entries
TIp: To move quickly through the list, say “ Previous
contact
” or “ Next contact .”
Note: It is recommended that Contact List recordings be
recorded in a stationary vehicle.
Turning Off System Prompts
To turn off certain SR prompts (for example, Main Menu. Please
say a command
):
Action
1
Press the TALK button.
2 When prompted, say “ Contact List .”
3 If the system responds: Contact list. Please say a command ,
say “
List Contacts. ” The system begins to list the
stored entries.
or
If the system responds: Contact list is empty. Do you wish to
add a contact?
, say “ No .” The system exits to ready
state.
Action
1
Press the TALK button.
2 When prompted, say “ Setup Menu .”
3 Say “ Prompts On ” or “ Prompts Off .”
The system responds:
Prompts On or Prompts Off .