Adding Contact list entries
You can store a list of names and phone numbers locally in the handsfree system’s contact
list. The contact names stored in the Contact List can be called using the "Call <name>" VR
command.
The Contact List can support up to 50 entries. The Contact List is only available when a
handset device is connected to the handsfree system.
You can enter up to 50 digits for each Contact List entry. You can also use +, *, or #
characters when dialing a number. “Wait“ and “Pause” commands are also accepted.
Note: For safety reasons, it is recommended that contact list entries be added while the
vehicle is stationary.
Note: Speak numbers as continuous digits. For example, dictate 555-2211 as “5-5-5-2-2-1-1”,
not “5-5-5-twenty-two-eleven.”
Adding a Contact List Entry
1 Press and release the Multi-Function button.
The handsfree system responds: Phone menu. {Say a command}.
2 When prompted, say “Contact List”.
3 The handsfree system responds: Contact list. {Say a command}. Say “Add Contact”.
4 When the handsfree system responds: Say the name. Recite the name of the contact to be
stored.
If an error is detected, the handsfree system asks you to try again.
If it accepts the name, the handsfree system responds: Say the number for <name>.
5 Dictate the number as an entire number (without pauses between digits).
or
Dictate the number as a series of segments (for example, say the 1st 3 digits, then the next
3, etc.), until you have dictated the entire number.
The handsfree system repeats the number it heard.
6 When you have correctly entered the entire phone number, say “Store” (or “Yes”) to store
the contact.
The handsfree system responds: Contact added. Would you like to add another contact?
7 Say “No” to exit contact list.
or
Say “Yes” to add another entry.
Deleting a Contact List Entry
1 Press and release the Multi-Function button.
The handsfree system responds: Phone menu. {Say a command}.
2 When prompted, say “Contact List”.
3 The handsfree system responds: Contact list. {Say a command}. Say “Delete <name>”
(where <name> is the name of a contact list entry).
4 When the handsfree system responds: Are you sure you want to delete the contact
<name>? say “Yes”.
The handsfree system responds: Contact deleted.
