Motorola HS805 User manual

motorola.com
HS805

1
Quick Start
To quickly get started using your Motorola
Wireless Headset HS805 be sure you first do
the following:
• Install a fresh battery in your
headset (see page 12).
• Turn Bluetooth
®
on in your phone
(refer to your phone’s user guide).
• Turn on your headset. (press the
Multifunction button until the LED
flashes rapidly).
• Pair your headset with the your
phone prior to use (see page 17).

2
Export Law Assurances
This product is controlled under the export
regulations of the United States of America and
Canada. The Governments of the United States
of America and Canada may restrict the
exportation or re-exportation of this product to
certain destinations. For further information
contact the U.S. Department of Commerce or
the Canadian Department of Foreign Affairs and
International Trade.
The use of wireless devices and their accessories
may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use
of these products.
MOTOROLA and the Stylized M Logo are
registered in the US Patent & Trademark Office.
The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under
license. All other product or service names are
the property of their respective owners.
© Motorola, Inc., 2004.
6809489A63-O

3
Contents
Safety and General Information . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . 9
What Is Bluetooth Wireless
Technology? . . . . . . . . . . . . . . . . . . 9
How Can I Use My Wireless
Headset? . . . . . . . . . . . . . . . . . . . . . 9
Headset Features . . . . . . . . . . . . . 10
Using Your Headset . . . . . . . . . . . . 12
Replacing Your Headset Battery . . 12
Wearing Your Headset. . . . . . . . . . 15
Pairing Your Headset and Phone . . 17
Adjusting Headset Volume . . . . . . 20
Making and Receiving Calls . . . . . 21
Using Your Headset
Indicator LED. . . . . . . . . . . . . . . . . 24

4
Safety and General
Safety and General
Information
IMPORTANT INFORMATION ON SAFE
AND EFFICIENT OPERATION. READ THIS
INFORMATION BEFORE USING YOUR
DEVICE.
Users are not permitted to make changes or
modify the device in any way. Changes or
modifications not expressly approved by the
party responsible for compliance could void
the user’s authority to operate the
equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation. See 47 CFR
Sec. 15.19(3).

Safety and General
5
Electromagnetic
Interference/Compatibility
Note:
Nearly every electronic device is
susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed, or
otherwise configured for electromagnetic
compatibility.
Facilities
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your device in
any facility where posted notices instruct you
to do so. Hospitals or health care facilities
may be using equipment that is sensitive to
external RF energy.
Aircraft
When instructed to do so, turn off your
device when on board an aircraft. Any use of
a device must be in accordance with
applicable regulations per airline crew
instructions.

6
Safety and General
Medical Devices
Hearing Aids
Some devices may interfere with some
hearing aids. In the event of such
interference, you may want to consult with
your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from
RF energy. Your physician may be able to
assist you in obtaining this information.
Industry Canada Notice to Users
Operation is subject to the following two
conditions: (1) This device may not cause
interference and (2) This device must accept
any interference, including interference that
may cause undesired operation of the device
Ref IC RSS 210 Sec. 5.11. The term “IC:”
before the certification/registration number
only signifies that registration was performed

Safety and General
7
based on a Declaration of Conformity
indicating that Industry Canada technical
specifications were met. It does not imply
that Industry Canada approved the
equipment. See Ref IC Self-Marking 6(f) and
RSP-100 Sec. 4.
FCC Notice to Users
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be

8
Safety and General
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and the receiver.
• Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.

Introduction
9
Introduction
What Is Bluetooth Wireless
Technology?
Bluetooth devices communicate without
wires, using built-in radio transceivers that
operate on a globally available radio
frequency to ensure worldwide compatibility.
Your Bluetooth Wireless Headset can
communicate with other Bluetooth devices
within a range of approximately 10 meters
(33 feet).
How Can I Use My Wireless
Headset?
Your Wireless Headset, with Bluetooth
technology, lets you connect with other
similarly equipped devices such as a
Motorola V600 with integrated
Bluetooth technology.
• Use your phone hands free.

10
Introduction
• Handle incoming and outgoing calls
with the headset multifunction control
button (MFB).
• Use voice activation to make calls.
Note: The HS805 supports both Headset
and Hands Free Bluetooth Profiles for
increased functionality and compatibility with
more products. Consult your user’s guide for
more information.
Headset Features
1 Multifunction Button
(MFB)— Controls multiple headset
functions.
2 Battery Door— Allows you to change the
battery.
Headset (Top View) Headset (Bottom View)
3
1
2
6
5
47

Introduction
11
3 Earhook— Attaches headset to ear.
4 Headset Indicator LED— Provides a
visual cue about headset status.
5 Microphone— Picks up your voice input.
6 Speaker— Plays the sound you receive
on the call.
7 Volume Control Buttons— Adjusts
speaker volume up or down.

12
Using Your Headset
Using Your Headset
Replacing Your Headset Battery
Battery Safety
For best performance, use only AAA Alkaline
or Lithium replacement batteries.
Used batteries must be disposed of
properly and may need to be
recycled. Contact your local
recycling center or the manufacturer of the
battery for proper disposal methods.
Warning: Never dispose of batteries in a fire
because they may explode.
Note: Please review the warnings and
instructions provided by the manufacturer
of your battery. Instructions may include:
(1) Keep batteries away from children and
seek immediate medical assistance if a
battery is swallowed. (2) Do not open
batteries, install them backwards, charge

Using Your Headset
13
them, or expose batteries to water, fire or
high temperatures. These activities may
cause a battery to explode or leak, resulting
in personal injury or property damage.
Step
1 Open the
battery door at
the back of the
headset.
Remove the old
battery, if
necessary.
2 Insert a new battery so the + and -
markings match the ones in the
battery compartment.
3 Close the battery door.

14
Using Your Headset
A fresh headset battery provides
approximately:
AAA Battery Talk Time Standby
Time
Energizer
Alkaline
22 Hours 16 Days
Energizer e
2
Lithium
29 Hours 20 Days

Using Your Headset
15
Wearing Your Headset
Placing the Headset on Your Ear
When packaged, the headset is originally set
up to wear on the right ear. To place the
headset on your ear:.
Step
1 Open the earhook
(45
°
from the
headset).
2 Loop the earhook
over your ear.
3 Press the headset
to your ear.
4 Point the
microphone
toward your
mouth.
040067o

16
Using Your Headset
Changing for Wear on the Left Ear
Step
1 Open the
earhook
(90
°
from the
headset).
2 Gently lift and
pull the top of
the earhook up
and off the
upper hinge pin.
Then pull it away
to remove it.
3 Flip the headset over.
4 Hook the bottom of the earhook onto the
lower hinge pin, then lift and pull the top
of the earhook over the upper hinge pin.
5 To change the volume button
orientation, see “Adjusting Headset
Volume” on page 20.

Using Your Headset
17
Pairing Your Headset and
Phone
Note: When your wireless headset is paired
with a phone and becomes out of range with
the phone for more than 10 minutes, the
headset powers off automatically. Pressing
the multifunction button powers the headset
back on and reconnects the headset to the
phone when it is within range.
“Pairing” creates a link between devices with
Bluetooth wireless technology, and allows the
phone to remember the headset’s unique ID.
When your headset and phone are paired, your
headset automatically connects to your phone.
Pairing
With the headset and phone close together:
Action
1 With the headset off, hold the
Multifunction Button until the LED
remains on (about 2 seconds).

18
Using Your Headset
2Performa device discovery from the
phone.
For details on device discovery for
your phone, refer to the phone’s
user’s guide.
3 When the scan is complete, the phone
displays the devices found.
4 Select the Motorola HS805 from the
discovered devices list and confirm
following the on screen prompts.
5 When prompted
by the phone,
enter the
passkey
0000
and confirm to
pair the headset
with the phone.
The device ID is
now stored in the
phone’s memory.
Pairing is successful
when the headset
indicator flashes
rapidly.
Action