Muller WALK-BOX 181220 User manual

It shall apply from: 12-10-2018 r.
THE ASSEMBLY INSTRUCTION OF:
WALK-BOX
PRODUCT CODE: 181220

ASSEMBLY INSTRUCTION
Product name: 181220 Walk-Box
Page 2of 4
TABLE OF CONTENTS
INTRODUCTION ....................................................................................................................................... 2
STAGE 1 –Preparatory work –safety zone............................................................................................. 3
STAGE 2 –Assembly of the construction ................................................................................................ 3
1. List of components ...................................................................................................................... 3
2. Assembly scheme ........................................................................................................................ 4
INTRODUCTION
Overall dimensions: 2,40 x 1,20 x 0,25 m
1200 1200
2400
250
1200

ASSEMBLY INSTRUCTION
Product name: 181220 Walk-Box
Page 3of 4
STAGE 1 –Preparatory work –safety zone
Secure the assembly site to keep others at a distance
Set the construction in a designated place having regard to required impact area.
2400
5200
6400
1200
WARNING!
Installation shall be performed in accordance with safety & health standards
STAGE 2 –Assembly of the construction
1. List of components
No
Name of component
Dimensions
Qty.
Norm
1
Box 250 2S
120x120x250
2
2
Double top rail for Box
2
SP.BX.007
3
Countersunk screw
M10 x 20
24
DIN 7991

ASSEMBLY INSTRUCTION
Product name: 181220 Walk-Box
Page 4of 4
2. Assembly scheme
Set the concrete elements (point 1) in a designated place having regard to required impact
area.
1
1
Screw the top rails (point 2) to the top of concrete elements (point 1 ) by using countersunk
screws (point 3).
1
1
2
2
A
A ( 1 : 5 )
3
2
Remove the slacks in joints
Put the statutory plate