NEC NEC Express5800 Series User manual

Chapter 1 General Description
Chapter 2 Preparations
Chapter 3 Setup
Chapter 4 Appendix
NEC Express Server
Express5800 Series
Express5800/T110j-S, T110j-S (2nd-Gen)
EXP338, 338A
User's Guide
10.119.01-101.01
March 2020
© NEC Corporation 2020

Manuals
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
2
Manuals
Attached as a book
Safety Precautions and
Regulatory Notices
Describes points of caution to ensure the safe use of this server.
Read these cautions before using this server.
Getting Started Describes how to use this server, from unpacking to operations. See
this guide first and read the outline of this product.
Included in EXPRESSBUILDER as an electric manual
User’s Guide
Chapter 1: General Description Overviews, names, and functions of the server components
Chapter 2: Preparations Installation of additional options, connection of peripheral devices,
and suitable location for this server
Chapter 3: Setup System BIOS configurations and summary of EXPRESSBUILDER
Chapter 4: Appendix Specifications and other information
Installation Guide (Windows)
Chapter 1: Installing Windows Installation of Windows and drivers, and precautions for installation
Chapter 2: Installing Bundled
Software
Installation of NEC ESMPRO, Universal RAID Utility, and other
bundled software
Maintenance Guide
Chapter 1: Maintenance Server maintenance and troubleshooting
Chapter 2: Useful Features The details of system BIOS settings, RAID Configuration Utility, and
EXPRESSBUILDER
Chapter 3: Appendix Error messages and Windows Event Logs
Other manuals
The detail of NEC ESMPRO, Universal RAID Utility, and other features.

Contents
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 3
Contents
Manuals.................................................................................................................................................................2
Contents ................................................................................................................................................................ 3
Conventions Used in This Document ....................................................................................................................6
Signs and symbols for safety ........................................................................................................................6
Notations used in the text..............................................................................................................................7
Optical disk drive........................................................................................................................................... 7
Hard disk drive ..............................................................................................................................................7
Removable media .........................................................................................................................................7
Abbreviations of Operating Systems(Windows) ............................................................................................ 8
POST ........................................................................................................................................................... 8
BMC ...........................................................................................................................................................8
Declaration of Product Name ........................................................................................................................8
Trademarks ...........................................................................................................................................................9
License Notification .............................................................................................................................................10
Warnings and Additions to This Document .......................................................................................................... 12
Latest editions.............................................................................................................................................12
Safety notes ................................................................................................................................................12
Warning labels ............................................................................................................................................13
Handling precautions ..................................................................................................................................14
Chapter 1 General Description.........................................................................................................................16
1. Introduction .................................................................................................................................................17
2. Accessories.................................................................................................................................................18
3. Features...................................................................................................................................................... 19
3.1 Firmware and Software Version Management .................................................................................20
4. Names and Functions of Parts....................................................................................................................21
4.1 Front of the Server...........................................................................................................................21
4.2 Rear View ........................................................................................................................................ 22
4.3 Internal View .................................................................................................................................... 23
4.4 Motherboard ....................................................................................................................................25
4.5 Indicators .........................................................................................................................................26
4.5.1 POWER LED ( ) ............................................................................................................26
4.5.2 STATUS LED 1, 2 (1- -2) ...............................................................................................27
4.5.3 Global HDD LED 1, 2 (1- -2) ......................................................................................... 28
4.5.4 Power Capping LED ..........................................................................................................28
4.5.5 Optical Disk Access LED ................................................................................................... 29
4.5.6 DISK LED 1, 2 ...................................................................................................................29
4.5.7 LEDs for LAN connectors ..................................................................................................30
4.5.8 AC POWER LED on power supply unit ............................................................................. 31
4.5.9 Battery LED (Optional).......................................................................................................32
Chapter 2 Preparations ....................................................................................................................................33
1. Installing Internal Optional Devices .............................................................................................................34
1.1 Safety Precautions........................................................................................................................... 34
1.2 Overview of Installation and Removal..............................................................................................35
1.3 Removing the Side Cover ................................................................................................................36

Contents
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
4
1.4 Removing the Front Bezel ...............................................................................................................37
1.5 TPM Kit ............................................................................................................................................ 38
Installation .........................................................................................................................38
1.6 Memory (DIMM)...............................................................................................................................39
Maximum supported memory size ..................................................................................... 40
Installation order ................................................................................................................40
Operating speed ................................................................................................................41
Installation .........................................................................................................................42
Removal ............................................................................................................................43
1.7 Use of Internal Hard Disk Drives in the RAID System .....................................................................44
Using the Software RAID (SW RAID) ................................................................................44
Using an optional RAID controller......................................................................................45
Notes on setting up a RAID System ..................................................................................46
1.8 Flash Backup Unit for RAID Controller.............................................................................................48
Handling precautions .........................................................................................................48
Installing the Flash Backup Unit......................................................................................... 48
Removal ............................................................................................................................51
1.9 PCI Card ..........................................................................................................................................52
Notes ................................................................................................................................. 53
List of optional devices and installation slots .....................................................................54
Installation .........................................................................................................................56
Configuration after installing .............................................................................................. 58
Removal ............................................................................................................................58
Installing the N8117-01A extra RS-232C connector kit ...................................................... 59
Installing the N8181-172 Additional fan kit for PCIe card................................................... 61
1.10 HDD Cages......................................................................................................................................66
Installing a 3.5-inch HDD cage and hard disk drives ......................................................... 67
Removing hard disk drives ................................................................................................ 68
Installing a 2.5-inch HDD cage and hard disk drives ......................................................... 70
Installing an extra 2.5-inch HDD cage ............................................................................... 73
How to open the extra 2.5-inch HDD cage door ................................................................ 74
Installing the hard disk drive .............................................................................................. 75
1.11 Optical Disk Drive ............................................................................................................................76
Replacing drives ................................................................................................................76
Removal ............................................................................................................................77
1.12 Backup Devices ...............................................................................................................................78
Installation .........................................................................................................................79
Removal ............................................................................................................................79
1.13 N8181-152/153 Internal simple UPS ............................................................................................... 80
Installation for N8181-153 Internal simple UPS Control Kit ............................................... 81
Installation for N8181-152 Internal simple UPS ................................................................. 85
Removal ............................................................................................................................87
Precautions for operating with internal battery...................................................................87
1.14 High Temperature Resistant kit ........................................................................................................ 88
1.15 VMware ESXi Base kit (N8106-018)................................................................................................ 89
Installation .........................................................................................................................89
Support system..................................................................................................................89
1.16 Connecting Cables ..........................................................................................................................90
Internal interface cables.....................................................................................................90
Power cables .....................................................................................................................98
1.17 Attaching the Front Bezel............................................................................................................... 101
1.18 Installing the Side Cover ................................................................................................................ 102
1.19 Temperature Limitation for Supported CPU List............................................................................. 103
2. Installation and Connection....................................................................................................................... 104
2.1 Installation...................................................................................................................................... 104
Preparation for installation ............................................................................................... 106
2.2 Connection..................................................................................................................................... 108
Interface cables ............................................................................................................... 109
Power cord ...................................................................................................................... 111
Chapter 3 Setup ............................................................................................................................................. 112
1. Turning on the Server................................................................................................................................ 113

Contents
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 5
1.1 POST............................................................................................................................................. 114
POST sequence .............................................................................................................. 114
POST error messages ..................................................................................................... 115
2. BIOS Setup Utility (SETUP) ...................................................................................................................... 116
2.1 Overview........................................................................................................................................ 116
2.2 Starting and Exiting SETUP........................................................................................................... 116
Starting SETUP ............................................................................................................... 116
Exiting SETUP ................................................................................................................. 116
2.3 Usage of SETUP ........................................................................................................................... 117
2.4 Cases that Require Changes......................................................................................................... 119
3. BMC Management Console ...................................................................................................................... 121
3.1 Overview........................................................................................................................................ 121
3.2 BMC Management Console Network Configuration ...................................................................... 121
4. EXPRESSBUILDER.................................................................................................................................. 124
4.1 Features of EXPRESSBUILDER ...................................................................................................124
4.2 Usage of EXPRESSBUILDER .......................................................................................................124
5. Installing Software Components ............................................................................................................... 125
6. Turning off the Server................................................................................................................................ 126
Chapter 4 Appendix ....................................................................................................................................... 127
1. Specifications............................................................................................................................................ 128
1.1 Non-Redundant Power Supply Model............................................................................................ 128
1.2 Redundant Power Supply Model ................................................................................................... 131
1.3 Non-Redundant Power Supply Model............................................................................................ 134
1.4 Redundant Power Supply Model ................................................................................................... 137
2. Interrupt Lines ........................................................................................................................................... 143
3. Glossary.................................................................................................................................................... 144
4. Revision Record........................................................................................................................................ 146

Conventions Used in This Document
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
6
Conventions Used in This Document
Signs and symbols for safety
WARNING and CAUTION are used in this guide as following meaning.
WARNING
Indicates there is a risk of death or serious personal injury
CAUTION
Indicates there is a risk of burns, other personal injury, or property damage
Precautions and notices against hazards are presented with one of the following three symbols. The individual
symbols are defined as follows:
Attention This symbol indicates the presence of a hazard if
the instruction is ignored.
An image in the symbol illustrates the hazard type.
Prohibited
Action
This symbol indicates prohibited actions. An image
in the symbol illustrates a particular prohibited
action.
Mandatory
Action
This symbol indicates mandatory actions. An image
in the symbol illustrates a mandatory action to avoid
a particular hazard.
(Example in this guide)
WARNING
Use only the specified outlet
Use a grounded outlet with the specified voltage. Use of an improper power source may
cause a fire or a power leak.
(Electric shock risk)
(Do not disassemble)
(Example)
(Example)
(Example)
(Disconnect a plug)
Symbol to draw
attention
Description of a warning Term indicating a degree of danger

Conventions Used in This Document
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 7
Notations used in the text
In addition to safety-related symbols urging caution, three other types of notations are used in this document.
These notations have the following meanings.
Important Indicates critical items that must be followed when handling hardware or operating software. If
the procedures described are not followed, server failure, data loss, and other serious
malfunctions could occur.
Note Indicates items that must be confirmed when handling hardware or operating software.
Tips Indicates information that is helpful to keep in mind when using this server.
Optical disk drive
This server is equipped with one of the following drives. These drives are referred to as optical disk drive in this
document.
DVD-ROM drive
DVD Super MULTI drive
DVD Dual drive
Hard disk drive
Unless otherwise stated, hard disk drive described in this document refers to the following.
Hard disk drive (HDD)
Solid state drive (SSD)
Removable media
Unless otherwise stated, removable media described in this document refers to the following.
USB flash drive
Flash FDD

Conventions Used in This Document
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
8
Abbreviations of Operating Systems(Windows)
Windows Operating Systems are referred to as follows.

See Chapter 1 (1.2 Supported Windows OS) in Installation Guide (Windows) for detailed information.
Notations in this document Official names of Windows
Windows Server 2019
Windows Server 2019 Datacenter
Windows Server 2019 Standard
Windows Server 2019 Essentials
Windows Server 2016
Windows Server 2016 Datacenter
Windows Server 2016 Standard
Windows Server 2016 Essentials
POST
POST described in this document refers to the following.
Power On Self-Test
BMC
BMC described in this document refers to the following.
Baseboard Management Controller
Declaration of Product Name
This is the common document for Express5800/T110j-S, T110j-S (2nd-Gen).
If there is no specific statement in the contents, the explanations are for all products.
If the contents of each product are different, there will be an explanation with corresponding product name.
In addition, for checking the product name which you purchased, please refer to the specifications in Chapter 4
of the User’s Guide.

Trademarks
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 9
Trademarks
Microsoft, Windows, and Windows Server are registered trademarks or trademarks of Microsoft Corporation in the United States and
other countries.
Intel, Pentium, Core i3 and Xeon are registered trademarks of Intel Corporation of the United States.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective
trademark owners.

License Notification
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
10
License Notification
The System BIOS of this product contains open source software for the following license.
EDK/EDKII
OpenSSL
AMI CRYPTO LIBRARY USING WPA SUPPLICANT
Open source software of following license is included in the part of this product (Off-line Tools).
EDK/EDKII
EDK/EDKII
BSD License from Intel
Copyright (c) 2012, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
OpenSSL
OpenSSL License
-------
Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products
derived from this software without prior written permission. For written permission, please contact
[email protected].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their
names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

License Notification
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 11
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young ([email protected]).
This product includes software written by Tim Hudson ([email protected]).
AMI CRYPTO LIBRARY USING WPA SUPPLICANT
WPA Supplicant
-------
Copyright (c) 2003-2016, Jouni Malinen <[email protected]> and contributors
All Rights Reserved.
This program is licensed under the BSD license (the one with advertisement clause removed).
If you are submitting changes to the project, please see CONTRIBUTIONS file for more instructions.
License
-------
This software may be distributed, used, and modified under the terms of
BSD license:
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOTLIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Warnings and Additions to This Document
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
12
Warnings and Additions to This Document
1. Unauthorized reproduction of the contents of this document, in part or in its entirety, is prohibited.
2. This document is subject to change at any time without notice.
3. Do not make copies or alter the document content without permission from NEC Corporation.
4. If you have any concerns, or discover errors or omissions in this document, contact your sales
representative.
5. Regardless of article 4, NEC Corporation assumes no responsibility for effects resulting from your
operations.
6. The sample values used in this document are not the actual values.
Keep this document for future reference.
Latest editions
This document was created based on the information available at the time of its creation. The screen images,
messages and procedures are subject to change without notice. Substitute as appropriate when content has
been modified.
The most recent version of the guide, as well as other related documents, is also available for download from
the following website.

https://www.nec.com/
Safety notes
To use this server safely, read thoroughly “Safety Precautions and Regulatory Notices” that comes with your
server.

Warnings and Additions to This Document
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 13
Warning labels
Warning labels are attached on or near the components with potential hazards. These labels are either attached
or printed on the components. Do not remove or black out this label and keep it clean. If no label is attached or
printed on the server contact your sales representative.

Warnings and Additions to This Document
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
14
Handling precautions
Be sure to observe the following precautions for the proper functioning of the server. Ignoring the precautions
may cause server malfunction or failure.
Do not use any cell phones and switch off them near the server. Electric waves from such devices can
cause server to malfunction.
Install the server in an appropriate place. For details, see Chapter 2 (2. Installation and Connection).
If a peripheral device is not plug-and-play device, make sure that the server is off and unplug the power
cord before connecting/removing cables to/from the device.
Make sure that the access LED on the server is off before turning off the power or ejecting an optical disk.
Wait for at least 30 seconds before turning on the server after turning off the server. If any Uninterruptible
Power Supply (UPS) unit is connected, set it to wait for at least 30 seconds before turning on the server
after power off.
Turn off the server and unplug the power cord before moving it.
Regularly clean the server to prevent various types of failure. For details, see Chapter 1 (2. Daily
Maintenance) in "Maintenance Guide".
Momentary voltage drop may occur due to lightning strike. To prevent this, use of UPS is recommended.
We do not guarantee that the server’s optical disk drive will play a copy-protected CD that does not
conform to standards.
In the following cases, check and adjust the system clock before operation.
After transportation
After storage
After the server is used following a period of disuse, in which the storage conditions did not conform to
the conditions that guarantee server operations (temperature: 5 to 40°C (when High Temperature
Resistant Kit is installed: 5 to 48°C (it’s subject to composition restrictions.)); humidity: 10% to 85%).
Check the system clock approximately once per month.
We recommend you store the server at room temperature. Keep the following storage conditions.
Temperature: 10C to 55C, Humidity: 10% to 85% (No condensation of moisture)
Do not use the server, or removable/backup media such as tape cartridges when moving them from a cold
place to a warm place. The condensation will occur and cause malfunctions and failures when these are
used in such state. Use the server after waiting sufficiently.
Reference: Time effective at avoiding condensation in winter (5C or more differences between the room
temperature and atmospheric temperature)
Disk devices: Approximately 2 to 3 hours
Tape media: Approximately 1 day
For optional devices, we recommend you use our NEC products. Even if they are successfully installed or
connected, installation of unsupported devices can cause the server to malfunction or even failure. You
will be charged to repair failure or damage caused by use of such products even within warranty period.

Warnings and Additions to This Document
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 15
Using a computer extensively may affect different parts of your body. Here are tips you should follow while working on
a computer to minimize strain on your body.
Keep proper posture
The basic body position for using a computer is sitting straight with
your hands on the keyboard parallel with the floor, and your eyes
directed slightly downward toward the monitor. With the proper
posture described above, no unnecessary strain is applied on any
part of your body, in other words when your muscles are most
relaxed.
Working on the computer with bad posture such as hunching over or
being too close to the monitor could cause fatigue or deteriorated
eyesight.
Adjust the angle of your display
Most display units are designed for adjustment of the horizontal and
vertical angles. This adjustment is important to prevent the screen
from reflecting bright lights and to make the display contents easy to
see. Working without adjusting the display to a comfortable angle
makes it difficult for you to maintain a proper posture and you will get
tired easily. Adjust the viewing angle before use.
Adjust the brightness and contrast of the display
Display screens have functions to control brightness and contrast.
The most suitable brightness/contrast depends on age, individuals,
and environment, so adjust it to suit your preferences. A too bright or
too dark display is bad for your eyes.
Adjust the angle of keyboard
Some keyboards are ergonomically designed, which allow the angle
to be adjusted. Adjusting the angle of the keyboard is effective to
reduce tension on your shoulders, arms, and fingers.
Clean your equipment
Keeping your equipment clean is important not only for the appearance but also for functional and safety reasons. A
dusty monitor makes it difficult to see the display contents, so clean it regularly.
Take rest breaks
When you feel tired, take a break. Light exercise is also
recommended.
Tips for your health and safety

Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
16
NEC Express5800 Series
Express5800/T110j-S, T110j-S(2nd-Gen)
General Description
This chapter introduces the features of this server and the name of each part.
1. Introduction
2. Accessories
Describes the accessories of the server.
3. Features
Describes the features of the server and the server management.
4. Names and Functions of Parts
Describes the name of each part contained in the server.

1. Introduction
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 17
Chapter 1 General Description
1. Introduction
Thank you for purchasing this NEC Express5800 Series product.
This high performance server is powered by the latest Intel processor.
Intel Xeon Processor
Intel Core i3 Processor
Intel Pentium Processor
NEC’s latest technology and architectures realize high-power and high-speed operation that cannot be matched
by existing servers.
The server is designed with consideration of not only reliability but also expandability, which enables you to use
it as a network server.
Read this document before using the server thoroughly to fully understand handling of Express5800 Series
Server and appreciate its functions to the maximum extent.

2. Accessories
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
18
Chapter 1 General Description
2. Accessories
The carton box contains various accessories which are required for setup or maintenance. Make sure you have
them all for future use.
Rubber Foot
Bezel Lock Key*1
Screw for fix to backup device
Cable Tie (for securing AC power cord)
Getting Started
Safety Precautions and Regulatory Notices
*1 Requires 2.5-inch HDD cage.
Make sure you have all accessories and inspect them. If an accessory is missing or damaged, contact your sales
representative.
Important The chassis serial number plate and maintenance label is located on the
server. If the serial number does not match the number on the warranty, you
may not be guaranteed against failure even within the warranty period.
Contact your sales representative if they do not match.

3. Features
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide 19
Chapter 1 General Description
3. Features
The server has the following standard features:
High performance
Intel Xeon, Pentium, Core-i3 processor
Turbo Boost feature *1
Hyper Threading feature *1
High-speed memory access (DDR4 2666 supported)
*:Intel Core-i3,Pentium processor are DDR4 2400 supported
High-speed disk access (SATA 6 Gbps, SAS 12 Gbps supported)
High-speed 1000BASE-T (2 ports) interface
(1 Gbps/100 Mbps/10 Mbps supported)
High reliability
Processor throttle-ring feature
Memory monitoring feature (error correction/error detection)
Memory degeneracy feature (logical isolation of a failed device)
Bus parity error detection
Temperature detection
Error detection
Internal fan monitoring feature
Internal voltage monitoring feature
RAID system (disk array)
Auto rebuild feature (hot swapping supported)
BIOS password feature
Power redundant feature (hot swapping supported)*2
The security lock that comes with Front Bezel
HDD (hot swapping supported, depend on HDD type)
Management utilities
NEC ESMPRO
ExpressUpdate
Remote controlling feature (BMC Management Console)
RAID system management utility (Universal RAID Utility)
Hard disk drive monitoring
Power Supply monitoring feature
Power saving and noiseless design
Power monitoring feature
Power control feature
High-efficiency power supply supporting 80 PLUS Platinum
Fan control appropriate to environment, work load, and configuration
Noiseless design
Enhanced Intel SpeedStep Technology supported
Expandability
Various PCI slots
PCI Express 3.0 (x 16 lanes) : 1 slot (low profile)
PCI Express 3.0 (x 4 lanes): 3 slot (low profile)
Large memory of up to 64 GB
Backup device bay provided as standard
USB 3.0 and USB 3.1 interface (requires the supporting OS)
Three LAN connectors (one for management LAN)
Dual M.2 SATA mount kit (Optional. Max 2 SSD)

3. Features
Express5800/T110j-S, T110j-S (2nd-Gen) User’s Guide
20
Chapter 1 General Description
Ready to use
Hard disk drives can be installed with one-touch setup, which requires no cables (hot swap supported)*
*: 2.5-inch HDD
Various built-in features
Redundant power supply system supported*2
El Torito Bootable CD-ROM (no emulation mode) format supported
Software power-off
Remote power-on feature
AC-Link feature
Remote console feature
Baseboard Management Controller (BMC) conforming to IPMI v2.0
Internal simple UPS Control kit (Optional)
Internal battery can be installed. Space-saving and easy to control by including the alternate function of
UPS.
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D) utility
Easy setup
EXPRESSBUILDER (OS setup utility)
BIOS setup utility (SETUP)
Maintenance features
Off-line tool
Memory dump feature using the DUMP switch
*1: Supporting this function depends on CPU type.
*2: EXP338A only
3.1 Firmware and Software Version Management
You can manage the version of firmware or software on the server and update them with an update package
by using NEC ESMPRO Manager and ExpressUpdate Agent.
This feature automatically updates multiple packages without stopping the system by using NEC ESMPRO
Manager.