NEC UTR-1-1 (BK) User manual

2005.12 Ver:1.1
USB Handset
UTR-1-1 (BK) Installation Guide

Wall Mounting
UTR-1-1 can be installed on the wall by using a
wall plate. There are two wall mounting holes on
the base of UTR-1-1. To hang the UTR-1-1, align
the holes and slide it on the wall plate.
Remove handset hanger hook and rotate as
illustrated below.

USB Connection
Plug the USB cable (Type A connector) into the
back of cradle and plug USB cable (Type B
connector) into your PC’s USB port.

Handset Connection
Plug the handset connector (RJ-11) into the bottom
of cradle. Route the handset cable in the handset
groove.