NEC Univerge SV9100 User manual

NEC SV-9100
Modern Telephone Systems LLC
1032 Greystone Square | Jackson TN | 38305
1-888-422-3600 | 1-731-422-3600
www.moderntelephone.com
User Guide

To adjust the speaker volume:
Press speaker!
Then up / down on the circle buttons!
The volume will be saved at level selected
To adjust the handset volume:
Lift the handset!
Then up / down on the circle buttons!
The volume will be saved at level selected
To adjust the LCD contrast:
With the telephone on-hook!
Press up / down on the circle buttons!
The contrast will be saved at level selected
To adjust the ringing volume:
While the telephone is ringing!
Press up / down on the circle buttons!
The volume will be saved at level selected
Telephone Basics

Scroll Button
If the telephone is equipped with a scroll button.!
Press Scroll to cycle through the (4) pages of buttons.
Mic Button
If the Mic button is illuminated then the microphone is active on speakerphone calls.!
If the Mic button is not illuminated then the microphone is muted on speakerphone calls.
Speaker Button
Pressing the Speaker button will give you intercom dial tone, You can dial an intercom
number or press (9) to get an outside line.!
If your telephone is ringing, Press the Speaker button to answer the call on speakerphone.
Transfer Button
To transfer a call, Press the transfer button and dial the extension number or press the
programmed extension button then hang up. The call will be transferred.
Hold Button
To place a call on hold, Press the hold button and hang up. The call will be placed on hold
and will recall if left on hold to long. To retrieve a call on hold press the flashing Line
button.

Redial Button
Press the Redial button to redial one of the last (10) numbers dialed from your telephone.
Group Listen
Press the speaker button twice (Do not hang up) The speaker button will flash.!
You can talk to the caller through the handset.!
Your coworkers will hear the caller’s voice over the speakerphone.!
Conference Calling
Make the first call, Then press Conf in your display.!
Dial (9) to get an outside line and make your 2nd call.!
Press Add and then Begin.
Park Buttons
If your telephone has Park buttons assigned, You will use them instead of the Hold button.!
To place a call on Park, Press one of the Park buttons, The Park button will flash.!
To retrieve a call from Park, Press the flashing Park button.!
Repeat Redial
If you dialed a telephone number and it was busy.!
Press Feature + Redial.
The telephone will periodically go off-hook and dial the last telephone number.!
To cancel the repeat redial!
Press Feature + Redial.

Caller ID
To check the telephones Caller ID list.!
Press List in your display.!
Press CID in your display.!
Use the arrow keys to scroll through the last (50) calls.!
To call back the number displayed, Pick up the handset.
Call Pickup
By default all telephones are in the same pickup group.!
To pick up a call ringing at another telephone!
Lift up the handset and dial *#
Paging
Your telephone will have a PAGE button programmed on it.!
Normally this button is programmed to page all or most of the telephones.!
To make a page, Lift the handset and press PAGE. This will allow you to make a one way
paging announcement.
Call Forward
To forward your calls to another telephone.!
Press Speaker + 741 + 1+ extension number!
To cancel call forward!
Press Speaker + 741 + 0!

Do Not Disturb
To set your telephone in Do Not Disturb!
Press the (DownArrow) to the right of VMsg!
Press Prog + DND + Set + ALL !
To cancel Do Not Disturb !
Press the (DownArrow) to the right of VMsg!
Press Prog + DND + Cncl
Voice / Ring
Your telephone has the ability to ring or handsfree on intercom calls.!
To set your telephone to ring!
Press Speaker + 723 + Speaker
To set your telephone for handsfree!
Press Speaker + 721 + Speaker

Voicemail
Personal Voicemail Greeting
To record your personal voicemail greeting!
Press VMsg in your display!
Press Greet
Press Gr1
Press Rec, Start recording, Press #when finished.
Main Auto Attendant Greeting
To record the main auto attendant greeting!
From the Operator’s telephone!
Press VMsg + 72 + Instr + 001 + Rec
When finished recording Press #
Music-on-Hold
To record the built-in Music-on-Hold!
From the Operator’s telephone!
Press Speaker + 616 + 7 + 001 (Have your music source ready to play after dialing 001)!
When finished recording just hang up the handset.!

Transferring a caller directly to a telephones voicemail
While on the phone with the outside caller!
Press Trf in the display then VMsg + extension number or extension button
Hang up the handset.!
Leave a Message in another mailbox
Press VMsg + LvMsg Start recording your message, Press #when done.!
Dial the extension number you want the message to goto. Then Press Send
Forwarding a message to another mailbox
While listening to a message, Dial 63 + *enter the extension to receive the message, Then
Press #!